-/* -*- mode: c; tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*- */
-
-/*********************************************************************
- * Clustal Omega - Multiple sequence alignment
- *
- * Copyright (C) 2010 University College Dublin
- *
- * Clustal-Omega is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is part of Clustal-Omega.
- *
- ********************************************************************/
-
-/*
- * RCS $Id: seq.c 245 2011-06-15 12:38:53Z fabian $
- *
- *
- * Module for sequence/alignment IO and misc.
- *
- * This depends heavily on Sean Eddy's squid library, which is obsoleted by
- * HMMER3's Easel. However, easel doesn't support that many non-aligned input
- * formats.
- *
- */
-
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include <assert.h>
-#include "squid/squid.h"
-#include <ctype.h>
-
-#include "util.h"
-#include "log.h"
-#include "seq.h"
-
-
-#define ALLOW_ONLY_PROTEIN 0 /* requested by Hamish, FS, r244 -> r245 */
-
-
-
-
-/**
- * @brief Stripped down version of squid's alistat
- *
- *
- * @param[in] prMSeq
- * The alignment to analyse
- * @param[in] bSampling
- * For many sequences: samples from pool
- * @param[in] bReportAll
- * Report identities for all sequence pairs
- *
- * Don't have to worry about sequence case because our version of PairwiseIdentity is case insensitive
- */
-void
-AliStat(mseq_t *prMSeq, bool bSampling, bool bReportAll) {
-
- /*
- * bSampling = squid's do_fast
- * bReportAll = squid's allreport
- */
- float **ppdIdentMx; /* identity matrix (squid: imx) */
- const int iNumSample = 1000; /* sample size (squid: nsample) */
- int iAux;
-
- MSA *msa; /* squid's alignment structure */
- int small, large;
- int bestj, worstj;
- float sum;
- float worst_worst, worst_best, best_best;
- float avgid;
- int i, j;
- int nres; /* number of residues */
-
- if (bSampling && bReportAll) {
- Log(&rLog, LOG_WARN,
- "Cannot report all and sample at the same time. Skipping %s()", __FUNCTION__);
- return;
- }
- if (FALSE == prMSeq->aligned) {
- Log(&rLog, LOG_WARN,
- "Sequences are not aligned. Skipping %s()", __FUNCTION__);
- return;
- }
-
- /* silence gcc warnings about uninitialized variables
- */
- worst_worst = worst_best = best_best = 0.0;
- bestj = worstj = -1;
-
-
- /** mseq to squid msa
- *
- * FIXME code overlap with WriteAlignment. Make it a function and take
- * code there (contains more comments) as template
- *
- */
- msa = MSAAlloc(prMSeq->nseqs,
- /* derive alignment length from first seq */
- strlen(prMSeq->seq[0]));
- for (i=0; i<prMSeq->nseqs; i++) {
- int key; /* MSA struct internal index for sequence */
- char *this_name = prMSeq->sqinfo[i].name; /* prMSeq sequence name */
- char *this_seq = prMSeq->seq[i]; /* prMSeq sequence */
- SQINFO *this_sqinfo = &prMSeq->sqinfo[i]; /* prMSeq sequence name */
-
- key = GKIStoreKey(msa->index, this_name);
- msa->sqname[key] = sre_strdup(this_name, strlen(this_name));
- /* setting msa->sqlen[idx] and msa->aseq[idx] */
- msa->sqlen[key] = sre_strcat(&(msa->aseq[key]), msa->sqlen[key],
- this_seq, strlen(this_seq));
- if (this_sqinfo->flags & SQINFO_DESC) {
- MSASetSeqDescription(msa, key, this_sqinfo->desc);
- }
- msa->nseq++;
- }
-
-
-
- nres = 0;
- small = large = -1;
- for (i = 0; i < msa->nseq; i++) {
- int rlen; /* raw sequence length */
- rlen = DealignedLength(msa->aseq[i]);
- nres += rlen;
- if (small == -1 || rlen < small) small = rlen;
- if (large == -1 || rlen > large) large = rlen;
- }
-
-
- if (bSampling) {
- avgid = AlignmentIdentityBySampling(msa->aseq, msa->alen,
- msa->nseq, iNumSample);
-
- } else {
- float best, worst;
-
- /* this might be slow...could use openmp inside squid */
- MakeIdentityMx(msa->aseq, msa->nseq, &ppdIdentMx);
- if (bReportAll) {
- printf(" %-15s %5s %7s %-15s %7s %-15s\n",
- "NAME", "LEN", "HIGH ID", "(TO)", "LOW ID", "(TO)");
- printf(" --------------- ----- ------- --------------- ------- ---------------\n");
- }
-
- sum = 0.0;
- worst_best = 1.0;
- best_best = 0.0;
- worst_worst = 1.0;
- for (i = 0; i < msa->nseq; i++) {
- worst = 1.0;
- best = 0.0;
- for (j = 0; j < msa->nseq; j++) {
- /* closest seq to this one = best */
- if (i != j && ppdIdentMx[i][j] > best) {
- best = ppdIdentMx[i][j]; bestj = j;
- }
- if (ppdIdentMx[i][j] < worst) {
- worst = ppdIdentMx[i][j]; worstj = j;
- }
- }
-
- if (bReportAll) {
- printf("* %-15s %5d %7.1f %-15s %7.1f %-15s\n",
- msa->sqname[i], DealignedLength(msa->aseq[i]),
- best * 100., msa->sqname[bestj],
- worst * 100., msa->sqname[worstj]);
- }
- if (best > best_best) best_best = best;
- if (best < worst_best) worst_best = best;
- if (worst < worst_worst) worst_worst = worst;
- for (j = 0; j < i; j++)
- sum += ppdIdentMx[i][j];
- }
- avgid = sum / (float) (msa->nseq * (msa->nseq-1)/2.0);
- if (bReportAll)
- puts("");
- FMX2Free(ppdIdentMx);
- } /* else bSampling */
-
-
-
- /* Print output
- */
- if (msa->name != NULL)
- printf("Alignment name: %s\n", msa->name);
- /*printf("Format: %s\n", SeqfileFormat2String(afp->format));*/
- printf("Number of sequences: %d\n", msa->nseq);
- printf("Total # residues: %d\n", nres);
- printf("Smallest: %d\n", small);
- printf("Largest: %d\n", large);
- printf("Average length: %.1f\n", (float) nres / (float) msa->nseq);
- printf("Alignment length: %d\n", msa->alen);
- printf("Average identity: %.2f%%\n", 100.*avgid);
-
- if (! bSampling) {
- printf("Most related pair: %.2f%%\n", 100.*best_best);
- printf("Most unrelated pair: %.2f%%\n", 100.*worst_worst);
- printf("Most distant seq: %.2f%%\n", 100.*worst_best);
- }
-
- /*
- char *cs;
- cs = MajorityRuleConsensus(msa->aseq, msa->nseq, msa->alen);
- printf cs;
- */
-
- MSAFree(msa);
-}
-/* end of AliStat() */
-
-
-
-
-
-/**
- * @brief Shuffle mseq order
- *
- * @param[out] mseq
- * mseq structure to shuffle
- *
- */
-void
-ShuffleMSeq(mseq_t *mseq)
-{
- int iSeqIndex;
- int *piPermArray;
-
-
- /* quick and dirty: create an array with permuted indices and
- * swap accordingly (which amounts to shuffling twice)
- */
-
- PermutationArray(&piPermArray, mseq->nseqs);
-
- for (iSeqIndex=0; iSeqIndex<mseq->nseqs; iSeqIndex++) {
- SeqSwap(mseq, piPermArray[iSeqIndex], iSeqIndex);
- }
-
- CKFREE(piPermArray);
-}
-/*** end: ShuffleMSeq() ***/
-
-
-/**
- * @brief Swap two sequences in an mseq_t structure.
- *
- * @param[out] prMSeq
- * Multiple sequence struct
- * @param[in] i
- * Index of first sequence
- * @param[in] j
- * Index of seconds sequence
- *
- *
- */
-void
-SeqSwap(mseq_t *prMSeq, int i, int j)
-{
- char *pcTmp;
- SQINFO rSqinfoTmp;
-
- assert(NULL!=prMSeq);
- assert(i<prMSeq->nseqs && j<prMSeq->nseqs);
-
- if (i==j) {
- return;
- }
-
- pcTmp = prMSeq->seq[i];
- prMSeq->seq[i] = prMSeq->seq[j];
- prMSeq->seq[j] = pcTmp;
-
- pcTmp = prMSeq->orig_seq[i];
- prMSeq->orig_seq[i] = prMSeq->orig_seq[j];
- prMSeq->orig_seq[j] = pcTmp;
-
- rSqinfoTmp = prMSeq->sqinfo[i];
- prMSeq->sqinfo[i] = prMSeq->sqinfo[j];
- prMSeq->sqinfo[j] = rSqinfoTmp;
-
- return;
-}
-/*** end: SeqSwap() ***/
-
-
-
-
-/**
- * @brief Dealigns all sequences in mseq structure, updates the
- * sequence length info and sets aligned to FALSE
- *
- * @param[out] mseq
- * The mseq structure to dealign
- *
- */
-void
-DealignMSeq(mseq_t *mseq)
-{
- int i; /* aux */
- for (i=0; i<mseq->nseqs; i++) {
- DealignSeq(mseq->seq[i]);
- mseq->sqinfo[i].len = strlen(mseq->seq[i]);
- }
- mseq->aligned = FALSE;
-
- return;
-}
-/*** end: DealinMSeq() ***/
-
-
-
-/**
- * @brief debug output of sqinfo struct
- *
- * @param[in] sqinfo
- * Squid's SQINFO struct for a certain seqeuence
- *
- * @note useful for debugging only
- *
- */
-void
-LogSqInfo(SQINFO *sqinfo)
-{
-
- /*LOG_DEBUG("sqinfo->flags = %d", sqinfo->flags);*/
- if (sqinfo->flags & SQINFO_NAME)
- Log(&rLog, LOG_FORCED_DEBUG, "sqinfo->name = %s", sqinfo->name);
-
- if (sqinfo->flags & SQINFO_ID)
- Log(&rLog, LOG_FORCED_DEBUG, "sqinfo->id = %s", sqinfo->id);
-
- if (sqinfo->flags & SQINFO_ACC)
- Log(&rLog, LOG_FORCED_DEBUG, "sqinfo->acc = %s", sqinfo->acc);
-
- if (sqinfo->flags & SQINFO_DESC)
- Log(&rLog, LOG_FORCED_DEBUG, "sqinfo->desc = %s", sqinfo->desc);
-
- if (sqinfo->flags & SQINFO_LEN)
- Log(&rLog, LOG_FORCED_DEBUG, "sqinfo->len = %d", sqinfo->len);
-
- if (sqinfo->flags & SQINFO_START)
- Log(&rLog, LOG_FORCED_DEBUG, "sqinfo->start = %d", sqinfo->start);
-
- if (sqinfo->flags & SQINFO_STOP)
- Log(&rLog, LOG_FORCED_DEBUG, "sqinfo->stop = %d", sqinfo->stop);
-
- if (sqinfo->flags & SQINFO_OLEN)
- Log(&rLog, LOG_FORCED_DEBUG, "sqinfo->olen = %d", sqinfo->olen);
-
- if (sqinfo->flags & SQINFO_TYPE)
- Log(&rLog, LOG_FORCED_DEBUG, "sqinfo->type = %d", sqinfo->type);
-
- if (sqinfo->flags & SQINFO_SS)
- Log(&rLog, LOG_FORCED_DEBUG, "sqinfo->ss = %s", sqinfo->ss);
-
- if (sqinfo->flags & SQINFO_SA)
- Log(&rLog, LOG_FORCED_DEBUG, "sqinfo->sa = %s", sqinfo->sa);
-}
-/*** end: log_sqinfo ***/
-
-
-/**
- * @brief convert int-encoded seqtype to string
- *
- * @param[in] seqtype int-encoded sequence type
- *
- * @return character pointer describing the sequence type
- *
- */
-const char*
-SeqTypeToStr(int seqtype)
-{
- switch (seqtype) {
- case SEQTYPE_DNA:
- return "DNA";
- case SEQTYPE_RNA:
- return "RNA";
- case SEQTYPE_PROTEIN:
- return "Protein";
- case SEQTYPE_UNKNOWN:
- return "UNKNOWN";
- default:
- Log(&rLog, LOG_FATAL, "Internal error in %s", __FUNCTION__);
- }
- return "Will never get here";
-}
-/*** end: seqtype_to_str ***/
-
-
-
-/**
- * @brief reads sequences from file
- *
- * @param[out] prMSeq
- * Multiple sequence struct. Must be preallocated.
- * FIXME: would make more sense to allocate it here.
- * @param[in] seqfile
- * Sequence file name. If '-' sequence will be read from stdin.
- * @param[in] seqtype
- * int-encoded sequence type. Set to
- * SEQTYPE_UNKNOWN for autodetect (guessed from first sequence)
- * @param[in] iMaxNumSeq
- * Return an error, if more than iMaxNumSeq have been read
- * @param[in] iMaxSeqLen
- * Return an error, if a seq longer than iMaxSeqLen has been read
- *
- * @return 0 on success, -1 on error
- *
- * @note
- * - Depends heavily on squid
- * - Sequence file format will be guessed
- * - If supported by squid, gzipped files can be read as well.
- */
-int
-ReadSequences(mseq_t *prMSeq, char *seqfile, int seqtype,
- int iMaxNumSeq, int iMaxSeqLen)
-{
- int fmt = SQFILE_UNKNOWN; /* file format: auto detect if unknown */
- SQFILE *dbfp; /* sequence file descriptor */
- char *cur_seq;
- SQINFO cur_sqinfo;
- int iSeqIdx; /* sequence counter */
- int iSeqPos; /* sequence string position counter */
-
- assert(NULL!=seqfile);
-
-
- /* Try to work around inability to autodetect from a pipe or .gz:
- * assume FASTA format
- */
- if (SQFILE_UNKNOWN == fmt &&
- (Strparse("^.*\\.gz$", seqfile, 0) || strcmp(seqfile, "-") == 0)) {
- fmt = SQFILE_FASTA;
- }
-
- /* Using squid routines to read input. taken from seqstat_main.c. we don't
- * know if input is aligned, so we use SeqfileOpen instead of MSAFileOpen
- * etc. NOTE this also means we discard some information, e.g. when
- * reading from and writing to a stockholm file, all extra MSA
- * info/annotation will be lost.
- *
- */
-
- if (NULL == (dbfp = SeqfileOpen(seqfile, fmt, NULL))) {
- Log(&rLog, LOG_ERROR, "Failed to open sequence file %s for reading", seqfile);
- return -1;
- }
-
-
- /* FIXME squid's ReadSeq() will exit with fatal error if format is
- * unknown. This will be a problem for a GUI. Same is true for many squid
- * other functions.
- *
- * The original squid:ReadSeq() dealigns sequences on input. We
- * use a patched version.
- *
- */
- while (ReadSeq(dbfp, dbfp->format,
- &cur_seq,
- &cur_sqinfo)) {
-
- if (prMSeq->nseqs+1>iMaxNumSeq) {
- Log(&rLog, LOG_ERROR, "Maximum number of sequences (=%d) exceeded after reading sequence '%s' from '%s'",
- iMaxNumSeq, cur_sqinfo.name, seqfile);
- return -1;
- }
- if ((int)strlen(cur_seq)>iMaxSeqLen) {
- Log(&rLog, LOG_ERROR, "Sequence '%s' has %d residues and is therefore longer than allowed (max. sequence length is %d)",
- cur_sqinfo.name, strlen(cur_seq), iMaxSeqLen);
- return -1;
- }
-
- /* FIXME: use modified version of AddSeq() that allows handing down SqInfo
- */
-
- prMSeq->seq = (char **)
- CKREALLOC(prMSeq->seq, (prMSeq->nseqs+1) * sizeof(char *));
- prMSeq->seq[prMSeq->nseqs] = CkStrdup(cur_seq);
-
-
- prMSeq->sqinfo = (SQINFO *)
- CKREALLOC(prMSeq->sqinfo, (prMSeq->nseqs+1) * sizeof(SQINFO));
- SeqinfoCopy(&prMSeq->sqinfo[prMSeq->nseqs], &cur_sqinfo);
-
-#ifdef TRACE
- Log(&rLog, LOG_FORCED_DEBUG, "seq no %d: seq = %s", prMSeq->nseqs, prMSeq->seq[prMSeq->nseqs]);
- LogSqInfo(&prMSeq->sqinfo[prMSeq->nseqs]);
-#endif
- /* always guess type from first seq. use squid function and
- * convert value
- */
- if (0 == prMSeq->nseqs) {
- int type = Seqtype(prMSeq->seq[prMSeq->nseqs]);
- switch (type) {
- case kDNA:
- prMSeq->seqtype = SEQTYPE_DNA;
- break;
- case kRNA:
- prMSeq->seqtype = SEQTYPE_RNA;
- break;
- case kAmino:
- prMSeq->seqtype = SEQTYPE_PROTEIN;
- break;
- case kOtherSeq:
- prMSeq->seqtype = SEQTYPE_UNKNOWN;
- break;
- default:
- Log(&rLog, LOG_FATAL, "Internal error in %s", __FUNCTION__);
- }
-
- /* override with given sequence type but check with
- * automatically detected type and warn if necessary
- */
- if (SEQTYPE_UNKNOWN != seqtype) {
- if (prMSeq->seqtype != seqtype) {
- Log(&rLog, LOG_WARN, "Overriding automatically determined seq-type %s to %s as requested",
- SeqTypeToStr(prMSeq->seqtype), SeqTypeToStr(seqtype));
- prMSeq->seqtype = seqtype;
- }
- }
- /* if type could not be determined and was not set return error */
- if (SEQTYPE_UNKNOWN == seqtype && SEQTYPE_UNKNOWN == prMSeq->seqtype) {
- Log(&rLog, LOG_ERROR, "Couldn't guess sequence type from first sequence");
- FreeSequence(cur_seq, &cur_sqinfo);
- SeqfileClose(dbfp);
- return -1;
- }
- }
-
- Log(&rLog, LOG_DEBUG, "seq-no %d: type=%s name=%s len=%d seq=%s",
- prMSeq->nseqs, SeqTypeToStr(prMSeq->seqtype),
- prMSeq->sqinfo[prMSeq->nseqs].name, prMSeq->sqinfo[prMSeq->nseqs].len,
- prMSeq->seq[prMSeq->nseqs]);
-
- /* FIXME IPUAC and/or case conversion? If yes see
- * corresponding squid functions. Special treatment of
- * Stockholm tilde-gaps for ktuple code?
- */
-
- prMSeq->nseqs++;
-
- FreeSequence(cur_seq, &cur_sqinfo);
- }
- SeqfileClose(dbfp);
-
-#if ALLOW_ONLY_PROTEIN
- if (SEQTYPE_PROTEIN != prMSeq->seqtype) {
- Log(&rLog, LOG_FATAL, "Sequence type is %s. %s only works on protein.",
- SeqTypeToStr(prMSeq->seqtype), PACKAGE_NAME);
- }
-#endif
-
- /* Check if sequences are aligned */
- prMSeq->aligned = SeqsAreAligned(prMSeq);
-
-
- /* keep original sequence as copy and convert "working" sequence
- *
- */
- prMSeq->orig_seq = (char**) CKMALLOC(prMSeq->nseqs * sizeof(char *));
- for (iSeqIdx=0; iSeqIdx<prMSeq->nseqs; iSeqIdx++) {
-
- prMSeq->orig_seq[iSeqIdx] = CkStrdup(prMSeq->seq[iSeqIdx]);
-
-
- /* convert unknown characters according to set seqtype
- * be conservative, i.e. don't allow any fancy ambiguity
- * characters to make sure that ktuple code etc. works.
- */
-
- /* first on the fly conversion between DNA and RNA
- */
- if (prMSeq->seqtype==SEQTYPE_DNA)
- ToDNA(prMSeq->seq[iSeqIdx]);
- if (prMSeq->seqtype==SEQTYPE_RNA)
- ToRNA(prMSeq->seq[iSeqIdx]);
-
- /* then check of each character
- */
- for (iSeqPos=0; iSeqPos<(int)strlen(prMSeq->seq[iSeqIdx]); iSeqPos++) {
- char *res = &(prMSeq->seq[iSeqIdx][iSeqPos]);
- if (isgap(*res))
- continue;
-
- if (prMSeq->seqtype==SEQTYPE_PROTEIN) {
- if (NULL == strchr(AMINO_ALPHABET, toupper(*res))) {
- *res = AMINOACID_ANY;
- }
- } else if (prMSeq->seqtype==SEQTYPE_DNA) {
- if (NULL == strchr(DNA_ALPHABET, toupper(*res))) {
- *res = NUCLEOTIDE_ANY;
- }
- } else if (prMSeq->seqtype==SEQTYPE_RNA) {
- if (NULL == strchr(RNA_ALPHABET, toupper(*res))) {
- *res = NUCLEOTIDE_ANY;
- }
- }
- }
- }
-
-
- prMSeq->filename = CkStrdup(seqfile);
- Log(&rLog, LOG_INFO, "Read %d sequences (type: %s) from %s",
- prMSeq->nseqs, SeqTypeToStr(prMSeq->seqtype), prMSeq->filename);
-
- return 0;
-}
-/*** end: ReadSequences ***/
-
-
-/**
- * @brief allocate and initialise new mseq_t
- *
- * @param[out] prMSeq
- * newly allocated and initialised mseq_t
- *
- * @note caller has to free by calling FreeMSeq()
- *
- * @see FreeMSeq
- *
- */
-void
-NewMSeq(mseq_t **prMSeq)
-{
- *prMSeq = (mseq_t *) CKMALLOC(1 * sizeof(mseq_t));
-
- (*prMSeq)->nseqs = 0;
- (*prMSeq)->seq = NULL;
- (*prMSeq)->orig_seq = NULL;
- (*prMSeq)->seqtype = SEQTYPE_UNKNOWN;
- (*prMSeq)->sqinfo = NULL;
- (*prMSeq)->filename = NULL;
-}
-/*** end: NewMSeq ***/
-
-
-
-/**
- * @brief copies an mseq structure
- *
- * @param[out] prMSeqDest_p
- * Copy of mseq structure
- * @param[in] prMSeqSrc
- * Source mseq structure to copy
- *
- * @note caller has to free copy by calling FreeMSeq()
- *
- */
-void
-CopyMSeq(mseq_t **prMSeqDest_p, mseq_t *prMSeqSrc)
-{
- int i;
- assert(prMSeqSrc != NULL && prMSeqDest_p != NULL);
-
- NewMSeq(prMSeqDest_p);
-
- (*prMSeqDest_p)->nseqs = prMSeqSrc->nseqs;
- (*prMSeqDest_p)->seqtype = prMSeqSrc->seqtype;
- if (prMSeqSrc->filename!=NULL) {
- (*prMSeqDest_p)->filename = CkStrdup(prMSeqSrc->filename);
- }
-
- (*prMSeqDest_p)->seq = (char **)
- CKMALLOC((*prMSeqDest_p)->nseqs * sizeof(char *));
- (*prMSeqDest_p)->orig_seq = (char **)
- CKMALLOC((*prMSeqDest_p)->nseqs * sizeof(char *));
- (*prMSeqDest_p)->sqinfo = (SQINFO *)
- CKMALLOC((*prMSeqDest_p)->nseqs * sizeof(SQINFO));
-
-
-
- for (i=0; i<(*prMSeqDest_p)->nseqs; i++) {
- (*prMSeqDest_p)->seq[i] = CkStrdup(prMSeqSrc->seq[i]);
- (*prMSeqDest_p)->orig_seq[i] = CkStrdup(prMSeqSrc->orig_seq[i]);
- SeqinfoCopy(&(*prMSeqDest_p)->sqinfo[i], &prMSeqSrc->sqinfo[i]);
- }
-}
-/*** end: CopyMSeq ***/
-
-
-
-/**
- * @brief
- *
- * @param[in] seqname
- * The sequence name to search for
- * @param[in] mseq
- * The multiple sequence structure to search in
- *
- * @return -1 on failure, sequence index of matching name otherwise
- *
- * @warning If sequence name happens to be used twice, only the first
- * one will be reported back
- *
- */
-int
-FindSeqName(char *seqname, mseq_t *mseq)
-{
- int i; /* aux */
-
- assert(NULL!=mseq);
-
- for (i=0; i<mseq->nseqs; i++) {
- if (STR_EQ(mseq->sqinfo[i].name, seqname)) {
- return i;
- }
- }
-
- return -1;
-}
-/*** end: FindSeqName() ***/
-
-
-/**
- * @brief Frees an mseq_t and it's members and zeros all members
- *
- * @param[in] mseq mseq_to to free
- *
- * @note use in conjunction with NewMSeq()
- * @see new_mseq
- */
-void
-FreeMSeq(mseq_t **mseq)
-{
- int i;
-
- if (NULL==(*mseq)) {
- return;
- }
-
- if ((*mseq)->filename) {
- (*mseq)->filename = CKFREE((*mseq)->filename);
- }
-
- for (i=0; i<(*mseq)->nseqs; i++) {
- FreeSequence((*mseq)->seq[i], &(*mseq)->sqinfo[i]);
- CKFREE((*mseq)->orig_seq[i]);
- }
- if ((*mseq)->seq) {
- CKFREE((*mseq)->seq);
- }
- if ((*mseq)->orig_seq) { /* FIXME (FS): only ptr to ptr freed, actual sequences NOT freed*/
- CKFREE((*mseq)->orig_seq);
- }
- if ((*mseq)->sqinfo) {
- CKFREE((*mseq)->sqinfo);
- }
-
- (*mseq)->seqtype = SEQTYPE_UNKNOWN;
- (*mseq)->nseqs = 0;
-
- CKFREE((*mseq));
-}
-/*** end: FreeMSeq ***/
-
-
-/**
- * @brief Write alignment to file.
- *
- * @param[in] mseq
- * The mseq_t struct containing the aligned sequences
- * @param[in] pcAlnOutfile
- * The name of the output file
- * @param[in] outfmt
- * The alignment output format (defined in squid.h)
- *
- * @return Non-zero on error
- *
- * @note We create a temporary squid MSA struct in here because we never
- * use it within clustal. We might be better of using the old clustal
- * output routines instead.
- *
- */
-int
-WriteAlignment(mseq_t *mseq, const char *pcAlnOutfile, int outfmt)
-{
- int i; /* aux */
- MSA *msa; /* squid's alignment structure */
- FILE *pfOut = NULL;
- int key; /* MSA struct internal index for sequence */
- int alen; /* alignment length */
- bool use_stdout;
-
- assert(mseq!=NULL);
-
- if (MSAFILE_UNKNOWN == outfmt) {
- Log(&rLog, LOG_ERROR, "Unknown output format chosen");
- return -1;
- }
-
- if (NULL == pcAlnOutfile) {
- pfOut = stdout;
- use_stdout = TRUE;
- } else {
- use_stdout = FALSE;
- if (NULL == (pfOut = fopen(pcAlnOutfile, "w"))) {
- Log(&rLog, LOG_ERROR, "Could not open file %s for writing", pcAlnOutfile);
- return -1;
- }
- }
-
-
- /* derive alignment length from first seq */
- alen = strlen(mseq->seq[0]);
-
- msa = MSAAlloc(mseq->nseqs, alen);
-
- /* basic structure borrowed code from squid-1.9g/a2m.c:ReadA2M()
- * we actually create a copy of mseq. keeping the pointers becomes
- * messy when calling MSAFree()
- */
- for (i=0; i<mseq->nseqs; i++) {
- char *this_name = mseq->sqinfo[i].name; /* mseq sequence name */
- char *this_seq = mseq->seq[i]; /* mseq sequence */
- SQINFO *this_sqinfo = &mseq->sqinfo[i]; /* mseq sequence name */
-
- key = GKIStoreKey(msa->index, this_name);
- msa->sqname[key] = sre_strdup(this_name, strlen(this_name));
-
- /* setting msa->sqlen[idx] and msa->aseq[idx] */
- msa->sqlen[key] = sre_strcat(&(msa->aseq[key]), msa->sqlen[key],
- this_seq, strlen(this_seq));
-
- if (this_sqinfo->flags & SQINFO_DESC) {
- /* FIXME never get here ... */
- MSASetSeqDescription(msa, key, this_sqinfo->desc);
- }
- /* FIXME extend this by copying more stuff according to flags.
- * See MSAFileRead() in msa.c and used functions there
- *
- * Problem is that we never parse MSA information as we use squid'sSeqFile
- */
-
- msa->nseq++;
- }
-
-
- /* FIXME Would like to, but can't use MSAVerifyParse(msa) here, as it
- * will die on error. Need to implement our own version
- */
-#if 0
- MSAVerifyParse(msa);
-#endif
-
- /* The below is copy of MSAFileWrite() which originally only writes to stdout.
- */
-
- /* Be sloppy and make a2m and fasta the same. same for vienna (which is
- the same). same same. can can. boleh boleh */
- if (outfmt==SQFILE_FASTA)
- outfmt = MSAFILE_A2M;
- if (outfmt==SQFILE_VIENNA)
- outfmt = MSAFILE_VIENNA;
-
- switch (outfmt) {
- case MSAFILE_A2M:
- WriteA2M(pfOut, msa, 0);
- break;
- case MSAFILE_VIENNA:
- WriteA2M(pfOut, msa, 1);
- break;
- case MSAFILE_CLUSTAL:
- WriteClustal(pfOut, msa);
- break;
- case MSAFILE_MSF:
- WriteMSF(pfOut, msa);
- break;
- case MSAFILE_PHYLIP:
- WritePhylip(pfOut, msa);
- break;
- case MSAFILE_SELEX:
- WriteSELEX(pfOut, msa);
- break;
- case MSAFILE_STOCKHOLM:
- WriteStockholm(pfOut, msa);
- break;
- default:
- Log(&rLog, LOG_FATAL, "internal error: %s",
- "invalid output format should have been detected before");
- }
-
- if (use_stdout == FALSE) {
- (void) fclose(pfOut);
- Log(&rLog, LOG_INFO,
- "Alignment written to %s", pcAlnOutfile);
- }
- MSAFree(msa);
-
- return 0;
-}
-/*** end of WriteAlignment() ***/
-
-
-/**
- * @brief Removes all gap-characters from a sequence.
- *
- * @param[out] seq
- * Sequence to dealign
- *
- * @note seq will not be reallocated
- */
-void
-DealignSeq(char *seq)
-{
- int aln_pos;
- int dealn_pos;
-
- assert(seq!=NULL);
-
- dealn_pos=0;
- for (aln_pos=0; aln_pos<(int)strlen(seq); aln_pos++) {
- if (! isgap(seq[aln_pos])) {
- seq[dealn_pos++] = seq[aln_pos];
- }
- }
- seq[dealn_pos] = '\0';
-
- return;
-}
-/*** end: DealignSeq() ***/
-
-
-
-/**
- * @brief Sort sequences by length
- *
- * @param[out] prMSeq
- * mseq to sort by length
- * @param[out] cOrder
- * Sorting order. 'd' for descending, 'a' for ascending.
- *
- *
- */
-void
-SortMSeqByLength(mseq_t *prMSeq, const char cOrder)
-{
- int *piSeqLen;
- int *piOrder;
- int iSeqIndex;
- mseq_t *prMSeqCopy = NULL;
-
- assert('a'==cOrder || 'd'==cOrder);
-
- Log(&rLog, LOG_WARN,
- "FIXME: This modifies sequence ordering. Might not be what user wants. Will change output order as well");
-
- piSeqLen = (int *) CKMALLOC(prMSeq->nseqs * sizeof(int));
- piOrder = (int *) CKMALLOC(prMSeq->nseqs * sizeof(int));
- for (iSeqIndex=0; iSeqIndex<prMSeq->nseqs; iSeqIndex++) {
- piSeqLen[iSeqIndex] = prMSeq->sqinfo[iSeqIndex].len;
- }
- QSortAndTrackIndex(piOrder, piSeqLen, prMSeq->nseqs, cOrder, FALSE);
-
- CopyMSeq(&prMSeqCopy, prMSeq);
- for (iSeqIndex=0; iSeqIndex<prMSeq->nseqs; iSeqIndex++) {
- /* copy mseq entry
- */
- CKFREE(prMSeq->seq[iSeqIndex]);
- prMSeq->seq[iSeqIndex] = CkStrdup(prMSeqCopy->seq[piOrder[iSeqIndex]]);
-
- CKFREE(prMSeq->orig_seq[iSeqIndex]);
- prMSeq->orig_seq[iSeqIndex] = CkStrdup(prMSeqCopy->orig_seq[piOrder[iSeqIndex]]);
-
- SeqinfoCopy(&prMSeq->sqinfo[iSeqIndex], &prMSeqCopy->sqinfo[piOrder[iSeqIndex]]);
- }
-
- CKFREE(piSeqLen);
- CKFREE(piOrder);
- FreeMSeq(&prMSeqCopy);
-
- return;
-}
-/*** end: SortMSeqByLength() ***/
-
-
-
-/**
- * @brief Checks if sequences in given mseq structure are aligned. By
- * definition this is only true, if sequences are of the same length
- * and at least one gap was found
- *
- * @param[in] prMSeq
- * Sequences to check
- *
- * @return TRUE if sequences are aligned, FALSE if not
- *
- *
- */
-bool
-SeqsAreAligned(mseq_t *prMSeq)
-{
- bool bGapFound, bSameLength;
- int iSeqIdx; /* sequence counter */
- int iSeqPos; /* sequence string position counter */
-
- /* Special case of just one sequence:
- * it is arguable that a single sequence qualifies as a profile,
- * however, this is what we do at the first stage of MSA anyway.
- * So, if there is only 1 sequence it is a 1-profile
- * and it is (defined to be) aligned (with itself). FS, r240 -> 241
- */
- if (1 == prMSeq->nseqs) {
- return TRUE;
- }
-
-
- /* Check if sequences are aligned. For being aligned, the
- * sequences have to be of same length (bSameLength) and at least
- * one of them has to contain at least one gap (bGapFound)
- */
- bGapFound = FALSE;
- bSameLength = TRUE;
- for (iSeqIdx=0; iSeqIdx<prMSeq->nseqs; iSeqIdx++) {
- if (FALSE == bGapFound) {
- for (iSeqPos=0;
- iSeqPos<prMSeq->sqinfo[iSeqIdx].len && false==bGapFound;
- iSeqPos++) {
- if (isgap(prMSeq->seq[iSeqIdx][iSeqPos])) {
- bGapFound = TRUE;
- /* skip rest of sequence */
- break;
- }
- }
- }
-
- if (iSeqIdx>0) {
- if (prMSeq->sqinfo[iSeqIdx].len != prMSeq->sqinfo[iSeqIdx-1].len) {
- bSameLength = FALSE;
- /* no need to continue search, bSameLength==FALSE is
- * sufficient condition */
- break;
- }
- }
- }
-#if 0
- Log(&rLog, LOG_FORCED_DEBUG, "bSameLength=%d bGapFound=%d", bSameLength, bGapFound);
-#endif
- if (TRUE == bSameLength && TRUE == bGapFound) {
- return TRUE;
- } else {
- return FALSE;
- }
-
-}
-/*** end: SeqsAreAligned() ***/
-
-
-
-/**
- * @brief Creates a new sequence entry and appends it to an existing mseq
- * structure.
- *
- * @param[out] prMSeqDest_p
- * Already existing and initialised mseq structure
- * @param[in] pcSeqName
- * sequence name of the sequence to add
- * @param[in] pcSeqRes
- * the actual sequence (residues) to add
- *
- * @note Don't forget to update the align and type flag if necessary!
- *
- * FIXME allow adding of more features
- *
- */
-void
-AddSeq(mseq_t **prMSeqDest_p, char *pcSeqName, char *pcSeqRes)
-{
- int iSeqIdx = 0;
- SQINFO sqinfo;
-
- assert(NULL != prMSeqDest_p);
- assert(NULL != pcSeqName);
- assert(NULL != pcSeqRes);
-
- iSeqIdx = (*prMSeqDest_p)->nseqs;
-
- (*prMSeqDest_p)->seq = (char **)
- CKREALLOC((*prMSeqDest_p)->seq, (iSeqIdx+1) * sizeof(char *));
- (*prMSeqDest_p)->orig_seq = (char **)
- CKREALLOC((*prMSeqDest_p)->orig_seq, (iSeqIdx+1) * sizeof(char *));
- (*prMSeqDest_p)->sqinfo = (SQINFO *)
- CKREALLOC((*prMSeqDest_p)->sqinfo, (iSeqIdx+1) * sizeof(SQINFO));
-
-
- (*prMSeqDest_p)->seq[iSeqIdx] = CkStrdup(pcSeqRes);
- (*prMSeqDest_p)->orig_seq[iSeqIdx] = CkStrdup(pcSeqRes);
-
- /* should probably get ri of SqInfo altogether in the long run and just
- transfer the intersting members into our own struct
- */
- sqinfo.flags = 0; /* init */
-
- sqinfo.len = strlen(pcSeqRes);
- sqinfo.flags |= SQINFO_LEN;
-
- /* name is an array of SQINFO_NAMELEN length */
- strncpy(sqinfo.name, pcSeqName, SQINFO_NAMELEN-1);
- sqinfo.name[SQINFO_NAMELEN-1] = '\0';
- sqinfo.flags |= SQINFO_NAME;
-
- SeqinfoCopy(&(*prMSeqDest_p)->sqinfo[iSeqIdx],
- & sqinfo);
-
- (*prMSeqDest_p)->nseqs++;
-
- return;
-}
-/* end of AddSeq() */
-
-
-
-
-/**
- * @brief Appends an mseq structure to an already existing one.
- * filename will be left untouched.
- *
- * @param[in] prMSeqDest_p
- * MSeq structure to which to append to
- * @param[out] prMSeqToAdd
- * MSeq structure which is to append
- *
- *
- */
-void
-JoinMSeqs(mseq_t **prMSeqDest_p, mseq_t *prMSeqToAdd)
-{
- int iSrcSeqIndex;
- int iNewNSeq;
-
- assert(NULL != prMSeqDest_p && NULL != (*prMSeqDest_p));
- assert(NULL != prMSeqToAdd);
-
- if (0 == prMSeqToAdd->nseqs) {
- Log(&rLog, LOG_WARN, "Was asked to add 0 sequences");
- return;
- }
-
- /* warn on seqtype mismatch and keep original seqtype */
- if ((*prMSeqDest_p)->seqtype != prMSeqToAdd->seqtype) {
- Log(&rLog, LOG_WARN, "Joining sequences of different type");
- }
-
- /* leave filename as it is */
-
- /*
- * copy new seq/s, orig_seq/s, sqinfo/s
- */
- iNewNSeq = (*prMSeqDest_p)->nseqs + prMSeqToAdd->nseqs;
-
- (*prMSeqDest_p)->seq = (char **)
- CKREALLOC((*prMSeqDest_p)->seq, iNewNSeq * sizeof(char *));
-
- (*prMSeqDest_p)->orig_seq = (char **)
- CKREALLOC((*prMSeqDest_p)->orig_seq, iNewNSeq * sizeof(char *));
-
- (*prMSeqDest_p)->sqinfo = (SQINFO *)
- CKREALLOC((*prMSeqDest_p)->sqinfo, iNewNSeq * sizeof(SQINFO));
-
-
- for (iSrcSeqIndex=0; iSrcSeqIndex < prMSeqToAdd->nseqs; iSrcSeqIndex++) {
- int iDstSeqIndex = (*prMSeqDest_p)->nseqs++;
-
- (*prMSeqDest_p)->seq[iDstSeqIndex] =
- CkStrdup(prMSeqToAdd->seq[iSrcSeqIndex]);
-
- (*prMSeqDest_p)->orig_seq[iDstSeqIndex] =
- CkStrdup(prMSeqToAdd->orig_seq[iSrcSeqIndex]);
-
- SeqinfoCopy(&(*prMSeqDest_p)->sqinfo[iDstSeqIndex],
- & prMSeqToAdd->sqinfo[iSrcSeqIndex]);
- }
-
- (*prMSeqDest_p)->nseqs = iNewNSeq;
-
- (*prMSeqDest_p)->aligned = SeqsAreAligned(*prMSeqDest_p);
-
- return;
-}
-/*** end: JoinMSeqs() ***/