--- /dev/null
+#
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
+#
+# Copyright (c) 1997-2017 Oracle and/or its affiliates. All rights reserved.
+#
+# The contents of this file are subject to the terms of either the GNU
+# General Public License Version 2 only ("GPL") or the Common Development
+# and Distribution License("CDDL") (collectively, the "License"). You
+# may not use this file except in compliance with the License. You can
+# obtain a copy of the License at
+# https://oss.oracle.com/licenses/CDDL+GPL-1.1
+# or LICENSE.txt. See the License for the specific
+# language governing permissions and limitations under the License.
+#
+# When distributing the software, include this License Header Notice in each
+# file and include the License file at LICENSE.txt.
+#
+# GPL Classpath Exception:
+# Oracle designates this particular file as subject to the "Classpath"
+# exception as provided by Oracle in the GPL Version 2 section of the License
+# file that accompanied this code.
+#
+# Modifications:
+# If applicable, add the following below the License Header, with the fields
+# enclosed by brackets [] replaced by your own identifying information:
+# "Portions Copyright [year] [name of copyright owner]"
+#
+# Contributor(s):
+# If you wish your version of this file to be governed by only the CDDL or
+# only the GPL Version 2, indicate your decision by adding "[Contributor]
+# elects to include this software in this distribution under the [CDDL or GPL
+# Version 2] license." If you don't indicate a single choice of license, a
+# recipient has the option to distribute your version of this file under
+# either the CDDL, the GPL Version 2 or to extend the choice of license to
+# its licensees as provided above. However, if you add GPL Version 2 code
+# and therefore, elected the GPL Version 2 license, then the option applies
+# only if the new code is made subject to such option by the copyright
+# holder.
+#
+
+#
+# English diagnostic messages (and fragments) for Sun's XML parser.
+#
+# P-NNN ... parser messages
+# F-NNN ... message fragments (sometimes associated with more
+# than one message, but usually just with one)
+# V-NNN ... validation related messages
+#
+# Most messages can be produced in only one way.
+#
+
+
+#
+# Generic parsing messages, not specific to validation
+#
+P-000 = No parser input source!
+P-001 = Illegal character at end of document, &#x{0};
+P-002 = Expansion of entity "&{0};" is not well formed
+P-003 = Premature end of input
+# {0} - F000-F009, F011, F021.
+P-004 = Missing whitespace {0}
+P-005 = Only whitespace allowed {0}
+
+ #
+ # unadorned "missing whitespace", with P-004 only
+ #
+ # Concatenated with P-004 (P-004 + F000)
+ F-000 = after element name declaration
+ # Concatenated with P-004 (P-004 + F001)
+ F-001 = between attribute name and type
+ # Concatenated with P-004 (P-004 + F002)
+ F-002 = after NOTATION type name
+ # Concatenated with P-004 (P-004 + F003)
+ F-003 = between attribute type and default value
+ # Concatenated with P-004 (P-004 + F004)
+ F-004 = after #FIXED
+ # Concatenated with P-004 (P-004 + F005)
+ F-005 = after <!ENTITY declaration
+ # Concatenated with P-004 (P-004 + F006)
+ F-006 = after % in parameter entity declaration
+ # Concatenated with P-004 (P-004 + F007)
+ F-007 = after entity name
+ # Concatenated with P-004 (P-004 + F008)
+ F-008 = before SYSTEM literal URI
+ # Concatenated with P-004 (P-004 + F009)
+ F-009 = after PUBLIC keyword
+ # F-010 ... identifier can be reused
+ # Concatenated with P-004 (P-004 + F011)
+ F-011 = after notation name
+ # F-012 ... identifier can be reused
+ # F-013 ... identifier can be reused
+
+ #
+ # in declaration, in "S Name", with P-004 and P-005
+ #
+ F-014 = before name in <!DOCTYPE declaration
+ # Concatenated with P-005 (P-005 + F015)
+ F-015 = before name in <!ELEMENT declaration
+ # Concatenated with P-005 (P-005 + F016)
+ F-016 = before name in <!ATTLIST declaration
+ # Concatenated with P-005 (P-005 + F017)
+ F-017 = before name in <!ENTITY declaration
+ # Concatenated with P-005 (P-005 + F018)
+ F-018 = before NDATA notation name in <!ENTITY declaration
+ # Concatenated with P-005 (P-005 + F019)
+ F-019 = before name in <!NOTATION declaration
+
+# {0} - character
+P-006 = Name tokens must not start with "{0}" characters
+P-007 = Value must be quoted
+# {0} - character, {1} - F020-F023, F028-F032, {2} - xml entity name e.g.: Next character must be ">" terminating <!ENTITY...> declaration "%HTML.Version"
+P-008 = Next character must be "{0}" {1} {2}
+
+ # Concatenated with P-008 (P-008 + F020)
+ F-020 = terminating reference to entity
+ # Concatenated with P-008 (P-008 + F021)
+ F-021 = terminating reference to parameter entity
+ # Concatenated with P-008 (P-008 + F022)
+ F-022 = terminating comment
+ # Concatenated with P-008 (P-008 + F023)
+ F-023 = in XML Declaration
+ # Concatenated with P-008 (P-008 + F024)
+ F-024 = terminating internal DTD subset
+ # Concatenated with P-008 (P-008 + F025)
+ F-025 = terminating <!DOCTYPE ...> declaration
+ # Concatenated with P-008 (P-008 + F026)
+ F-026 = after attribute name
+ # Concatenated with P-008 (P-008 + F027)
+ F-027 = terminating element
+ # Concatenated with P-008 (P-008 + F028)
+ F-028 = starting content model for element
+ # Concatenated with P-008 (P-008 + F029)
+ F-029 = starting list of attribute NOTATIONS
+ # Concatenated with P-008 (P-008 + F030)
+ F-030 = beginning condition DTD subset
+ # Concatenated with P-008 (P-008 + F031)
+ F-031 = terminating <!ENTITY ...> declaration
+ # Concatenated with P-008 (P-008 + F032)
+ F-032 = terminating <!NOTATION ...> declaration
+
+P-009 = Illegal character or entity reference syntax
+
+P-010 = Only external parameter entities may use "%{0};" in entity values
+P-011 = Illegal parameter entity reference syntax
+P-012 = Use "<" for "<" in attribute values
+P-013 = Illegal reference to external entity "&{0};" in attribute
+P-014 = Reference to undefined entity "&{0};"
+# {0} - F033-F035
+P-015 = Expecting quoted value for {0}
+
+ # Concatenated with P-015 (P-015 + F033)
+ F-033 = PUBLIC identifier
+ # Concatenated with P-015 (P-015 + F034)
+ F-034 = SYSTEM identifier
+ # {0} - attribute name. Concatenated with P-015 (P-015 + F033)
+ F-035 = attribute value {0}
+
+P-016 = Illegal character in PUBLIC identifier: "{0}"
+P-017 = End of entity while processing comment
+P-018 = Processing instruction target is missing
+P-019 = XML declaration may only begin entities
+
+P-020 = Illegal processing instruction target: "{0}"
+P-021 = End of input inside processing instruction
+P-022 = Illegal processing instruction name, or missing whitespace
+P-023 = Illegal character "&#x{0};" ({1}) at end of XML Declaration
+P-024 = Expected "{0}=..."
+P-025 = XML version "{0}" should be declared
+P-026 = Illegal XML version string "{0}"
+P-027 = XML version "{0}" is recognized, but not "{1}"
+P-028 = Internal DTD subset must not have "<![..." constructs
+P-029 = Standalone declaration must be "yes" or "no", not "{0}"
+
+P-030 = Whitespace required before attributes
+P-031 = Attribute names must not start with "{0}" characters
+P-032 = Attribute "{0}" already appeared in this tag
+P-033 = Illegal xml:lang value "{0}"
+P-034 = Expected "</{0}>" to terminate element starting on line {1}
+P-035 = End of entity not allowed; an end tag is missing
+P-036 = ">" must terminate <!ELEMENT {0} ...> declaration, not "{1}"
+P-037 = Sequence content model must not contain "{0}"
+P-038 = Choice content model must not contain "{0}"
+P-039 = No content model may contain "{0}"
+
+P-040 = Need right parenthesis or "{1}" in content model, not "{0}"
+P-041 = Need right parenthesis, ",", or "|" in content model, not "{0}"
+# {0} - element name, {1} - character as a hex number
+P-042 = Illegal mixed content model for "{0}", next char = &#x{1};
+# {0} - element name, {1} - character e.g.: Mixed content model for "doc" must end with ")*", not "*".
+P-043 = Mixed content model for "{0}" must end with ")*", not "{1}"
+P-044 = Either an attribute declaration or ">" is expected, not "{0}"
+# {0} - attribute name, {1} - character e.g.: Illegal type (starts with "p") for attribute "xml:space"
+P-045 = Illegal type (starts with "{1}") for attribute "{0}"
+P-046 = Need keyword in conditional DTD section
+P-047 = Unterminated conditional DTD section
+P-048 = Only INCLUDE and IGNORE are allowed, not "{0}"
+P-049 = Illegal decimal character reference
+
+P-050 = Illegal hexadecimal character reference
+P-051 = Illegal XML character &#x{0};
+P-052 = Internal entity "&{0};" has characters after content
+P-053 = Unparsed entities such as "&{0};" must not be included
+P-054 = Using original entity definition for "&{0};"
+P-055 = Relative URI "{0}"; can not be resolved without a document URI
+P-056 = URI "{0}" has a fragment ID
+P-057 = Need "?>" to terminate XML declaration
+P-058 = External entity "&{0};" has characters after content
+P-059 = External parameter entity "%{0};" has characters after markup
+
+P-060 = Illegal character "{0}" in encoding name
+P-061 = Declared encoding "{0}" does not match actual one "{1}"; \
+ this might not be an error
+P-062 = Notation must be PUBLIC or SYSTEM
+P-063 = Using first definition of notation "{0}"
+P-064 = Premature end of parameter entity "%{0};"
+P-065 = Entity Resolver did not provide SYSTEM id; may affect relative URIs
+# P-066 ... ID available
+P-067 = Document root element is missing
+P-068 = Notation name is required
+P-069 = Expansion of entity "{0}" is recursive
+
+P-070 = Malformed second part of surrogate pair: &#x{0};
+P-071 = Illegal XML character: &#x{0};
+P-072 = Character data cannot have "]]>"
+# Character data section starts with "<![CDATA[" and is terminated with "]]>" with text in between. No change needed.
+P-073 = EOF while parsing <
git://source.jalview.org / jalview.git / blobdiff