+++ /dev/null
-#
-# This is the "master security properties file".
-#
-# An alternate java.security properties file may be specified
-# from the command line via the system property
-#
-# -Djava.security.properties=<URL>
-#
-# This properties file appends to the master security properties file.
-# If both properties files specify values for the same key, the value
-# from the command-line properties file is selected, as it is the last
-# one loaded.
-#
-# Also, if you specify
-#
-# -Djava.security.properties==<URL> (2 equals),
-#
-# then that properties file completely overrides the master security
-# properties file.
-#
-# To disable the ability to specify an additional properties file from
-# the command line, set the key security.overridePropertiesFile
-# to false in the master security properties file. It is set to true
-# by default.
-
-# In this file, various security properties are set for use by
-# java.security classes. This is where users can statically register
-# Cryptography Package Providers ("providers" for short). The term
-# "provider" refers to a package or set of packages that supply a
-# concrete implementation of a subset of the cryptography aspects of
-# the Java Security API. A provider may, for example, implement one or
-# more digital signature algorithms or message digest algorithms.
-#
-# Each provider must implement a subclass of the Provider class.
-# To register a provider in this master security properties file,
-# specify the provider and priority in the format
-#
-# security.provider.<n>=<provName | className>
-#
-# This declares a provider, and specifies its preference
-# order n. The preference order is the order in which providers are
-# searched for requested algorithms (when no specific provider is
-# requested). The order is 1-based; 1 is the most preferred, followed
-# by 2, and so on.
-#
-# <provName> must specify the name of the Provider as passed to its super
-# class java.security.Provider constructor. This is for providers loaded
-# through the ServiceLoader mechanism.
-#
-# <className> must specify the subclass of the Provider class whose
-# constructor sets the values of various properties that are required
-# for the Java Security API to look up the algorithms or other
-# facilities implemented by the provider. This is for providers loaded
-# through classpath.
-#
-# Note: Providers can be dynamically registered instead by calls to
-# either the addProvider or insertProviderAt method in the Security
-# class.
-
-#
-# List of providers and their preference orders (see above):
-#
-security.provider.1=SUN
-security.provider.2=SunRsaSign
-security.provider.3=SunEC
-security.provider.4=SunJSSE
-security.provider.5=SunJCE
-security.provider.6=SunJGSS
-security.provider.7=SunSASL
-security.provider.8=XMLDSig
-security.provider.9=SunPCSC
-security.provider.10=JdkLDAP
-security.provider.11=JdkSASL
-security.provider.12=SunPKCS11
-
-#
-# A list of preferred providers for specific algorithms. These providers will
-# be searched for matching algorithms before the list of registered providers.
-# Entries containing errors (parsing, etc) will be ignored. Use the
-# -Djava.security.debug=jca property to debug these errors.
-#
-# The property is a comma-separated list of serviceType.algorithm:provider
-# entries. The serviceType (example: "MessageDigest") is optional, and if
-# not specified, the algorithm applies to all service types that support it.
-# The algorithm is the standard algorithm name or transformation.
-# Transformations can be specified in their full standard name
-# (ex: AES/CBC/PKCS5Padding), or as partial matches (ex: AES, AES/CBC).
-# The provider is the name of the provider. Any provider that does not
-# also appear in the registered list will be ignored.
-#
-# There is a special serviceType for this property only to group a set of
-# algorithms together. The type is "Group" and is followed by an algorithm
-# keyword. Groups are to simplify and lessen the entries on the property
-# line. Current groups are:
-# Group.SHA2 = SHA-224, SHA-256, SHA-384, SHA-512, SHA-512/224, SHA-512/256
-# Group.HmacSHA2 = HmacSHA224, HmacSHA256, HmacSHA384, HmacSHA512
-# Group.SHA2RSA = SHA224withRSA, SHA256withRSA, SHA384withRSA, SHA512withRSA
-# Group.SHA2DSA = SHA224withDSA, SHA256withDSA, SHA384withDSA, SHA512withDSA
-# Group.SHA2ECDSA = SHA224withECDSA, SHA256withECDSA, SHA384withECDSA, \
-# SHA512withECDSA
-# Group.SHA3 = SHA3-224, SHA3-256, SHA3-384, SHA3-512
-# Group.HmacSHA3 = HmacSHA3-224, HmacSHA3-256, HmacSHA3-384, HmacSHA3-512
-#
-# Example:
-# jdk.security.provider.preferred=AES/GCM/NoPadding:SunJCE, \
-# MessageDigest.SHA-256:SUN, Group.HmacSHA2:SunJCE
-#
-#jdk.security.provider.preferred=
-
-
-#
-# Sun Provider SecureRandom seed source.
-#
-# Select the primary source of seed data for the "NativePRNG", "SHA1PRNG"
-# and "DRBG" SecureRandom implementations in the "Sun" provider.
-# (Other SecureRandom implementations might also use this property.)
-#
-# On Unix-like systems (for example, Solaris/Linux/MacOS), the
-# "NativePRNG", "SHA1PRNG" and "DRBG" implementations obtains seed data from
-# special device files such as file:/dev/random.
-#
-# On Windows systems, specifying the URLs "file:/dev/random" or
-# "file:/dev/urandom" will enable the native Microsoft CryptoAPI seeding
-# mechanism for SHA1PRNG and DRBG.
-#
-# By default, an attempt is made to use the entropy gathering device
-# specified by the "securerandom.source" Security property. If an
-# exception occurs while accessing the specified URL:
-#
-# NativePRNG:
-# a default value of /dev/random will be used. If neither
-# are available, the implementation will be disabled.
-# "file" is the only currently supported protocol type.
-#
-# SHA1PRNG and DRBG:
-# the traditional system/thread activity algorithm will be used.
-#
-# The entropy gathering device can also be specified with the System
-# property "java.security.egd". For example:
-#
-# % java -Djava.security.egd=file:/dev/random MainClass
-#
-# Specifying this System property will override the
-# "securerandom.source" Security property.
-#
-# In addition, if "file:/dev/random" or "file:/dev/urandom" is
-# specified, the "NativePRNG" implementation will be more preferred than
-# DRBG and SHA1PRNG in the Sun provider.
-#
-securerandom.source=file:/dev/random
-
-#
-# A list of known strong SecureRandom implementations.
-#
-# To help guide applications in selecting a suitable strong
-# java.security.SecureRandom implementation, Java distributions should
-# indicate a list of known strong implementations using the property.
-#
-# This is a comma-separated list of algorithm and/or algorithm:provider
-# entries.
-#
-securerandom.strongAlgorithms=NativePRNGBlocking:SUN,DRBG:SUN
-
-#
-# Sun provider DRBG configuration and default instantiation request.
-#
-# NIST SP 800-90Ar1 lists several DRBG mechanisms. Each can be configured
-# with a DRBG algorithm name, and can be instantiated with a security strength,
-# prediction resistance support, etc. This property defines the configuration
-# and the default instantiation request of "DRBG" SecureRandom implementations
-# in the SUN provider. (Other DRBG implementations can also use this property.)
-# Applications can request different instantiation parameters like security
-# strength, capability, personalization string using one of the
-# getInstance(...,SecureRandomParameters,...) methods with a
-# DrbgParameters.Instantiation argument, but other settings such as the
-# mechanism and DRBG algorithm names are not currently configurable by any API.
-#
-# Please note that the SUN implementation of DRBG always supports reseeding.
-#
-# The value of this property is a comma-separated list of all configurable
-# aspects. The aspects can appear in any order but the same aspect can only
-# appear at most once. Its BNF-style definition is:
-#
-# Value:
-# aspect { "," aspect }
-#
-# aspect:
-# mech_name | algorithm_name | strength | capability | df
-#
-# // The DRBG mechanism to use. Default "Hash_DRBG"
-# mech_name:
-# "Hash_DRBG" | "HMAC_DRBG" | "CTR_DRBG"
-#
-# // The DRBG algorithm name. The "SHA-***" names are for Hash_DRBG and
-# // HMAC_DRBG, default "SHA-256". The "AES-***" names are for CTR_DRBG,
-# // default "AES-128" when using the limited cryptographic or "AES-256"
-# // when using the unlimited.
-# algorithm_name:
-# "SHA-224" | "SHA-512/224" | "SHA-256" |
-# "SHA-512/256" | "SHA-384" | "SHA-512" |
-# "AES-128" | "AES-192" | "AES-256"
-#
-# // Security strength requested. Default "128"
-# strength:
-# "112" | "128" | "192" | "256"
-#
-# // Prediction resistance and reseeding request. Default "none"
-# // "pr_and_reseed" - Both prediction resistance and reseeding
-# // support requested
-# // "reseed_only" - Only reseeding support requested
-# // "none" - Neither prediction resistance not reseeding
-# // support requested
-# pr:
-# "pr_and_reseed" | "reseed_only" | "none"
-#
-# // Whether a derivation function should be used. only applicable
-# // to CTR_DRBG. Default "use_df"
-# df:
-# "use_df" | "no_df"
-#
-# Examples,
-# securerandom.drbg.config=Hash_DRBG,SHA-224,112,none
-# securerandom.drbg.config=CTR_DRBG,AES-256,192,pr_and_reseed,use_df
-#
-# The default value is an empty string, which is equivalent to
-# securerandom.drbg.config=Hash_DRBG,SHA-256,128,none
-#
-securerandom.drbg.config=
-
-#
-# Class to instantiate as the javax.security.auth.login.Configuration
-# provider.
-#
-login.configuration.provider=sun.security.provider.ConfigFile
-
-#
-# Default login configuration file
-#
-#login.config.url.1=file:${user.home}/.java.login.config
-
-#
-# Class to instantiate as the system Policy. This is the name of the class
-# that will be used as the Policy object. The system class loader is used to
-# locate this class.
-#
-policy.provider=sun.security.provider.PolicyFile
-
-# The default is to have a single system-wide policy file,
-# and a policy file in the user's home directory.
-#
-policy.url.1=file:${java.home}/conf/security/java.policy
-policy.url.2=file:${user.home}/.java.policy
-
-# whether or not we expand properties in the policy file
-# if this is set to false, properties (${...}) will not be expanded in policy
-# files.
-#
-policy.expandProperties=true
-
-# whether or not we allow an extra policy to be passed on the command line
-# with -Djava.security.policy=somefile. Comment out this line to disable
-# this feature.
-#
-policy.allowSystemProperty=true
-
-# whether or not we look into the IdentityScope for trusted Identities
-# when encountering a 1.1 signed JAR file. If the identity is found
-# and is trusted, we grant it AllPermission. Note: the default policy
-# provider (sun.security.provider.PolicyFile) does not support this property.
-#
-policy.ignoreIdentityScope=false
-
-#
-# Default keystore type.
-#
-keystore.type=pkcs12
-
-#
-# Controls compatibility mode for JKS and PKCS12 keystore types.
-#
-# When set to 'true', both JKS and PKCS12 keystore types support loading
-# keystore files in either JKS or PKCS12 format. When set to 'false' the
-# JKS keystore type supports loading only JKS keystore files and the PKCS12
-# keystore type supports loading only PKCS12 keystore files.
-#
-keystore.type.compat=true
-
-#
-# List of comma-separated packages that start with or equal this string
-# will cause a security exception to be thrown when passed to the
-# SecurityManager::checkPackageAccess method unless the corresponding
-# RuntimePermission("accessClassInPackage."+package) has been granted.
-#
-package.access=sun.misc.,\
- sun.reflect.
-
-#
-# List of comma-separated packages that start with or equal this string
-# will cause a security exception to be thrown when passed to the
-# SecurityManager::checkPackageDefinition method unless the corresponding
-# RuntimePermission("defineClassInPackage."+package) has been granted.
-#
-# By default, none of the class loaders supplied with the JDK call
-# checkPackageDefinition.
-#
-package.definition=sun.misc.,\
- sun.reflect.
-
-#
-# Determines whether this properties file can be appended to
-# or overridden on the command line via -Djava.security.properties
-#
-security.overridePropertiesFile=true
-
-#
-# Determines the default key and trust manager factory algorithms for
-# the javax.net.ssl package.
-#
-ssl.KeyManagerFactory.algorithm=SunX509
-ssl.TrustManagerFactory.algorithm=PKIX
-
-#
-# The Java-level namelookup cache policy for successful lookups:
-#
-# any negative value: caching forever
-# any positive value: the number of seconds to cache an address for
-# zero: do not cache
-#
-# default value is forever (FOREVER). For security reasons, this
-# caching is made forever when a security manager is set. When a security
-# manager is not set, the default behavior in this implementation
-# is to cache for 30 seconds.
-#
-# NOTE: setting this to anything other than the default value can have
-# serious security implications. Do not set it unless
-# you are sure you are not exposed to DNS spoofing attack.
-#
-#networkaddress.cache.ttl=-1
-
-# The Java-level namelookup cache policy for failed lookups:
-#
-# any negative value: cache forever
-# any positive value: the number of seconds to cache negative lookup results
-# zero: do not cache
-#
-# In some Microsoft Windows networking environments that employ
-# the WINS name service in addition to DNS, name service lookups
-# that fail may take a noticeably long time to return (approx. 5 seconds).
-# For this reason the default caching policy is to maintain these
-# results for 10 seconds.
-#
-networkaddress.cache.negative.ttl=10
-
-#
-# Properties to configure OCSP for certificate revocation checking
-#
-
-# Enable OCSP
-#
-# By default, OCSP is not used for certificate revocation checking.
-# This property enables the use of OCSP when set to the value "true".
-#
-# NOTE: SocketPermission is required to connect to an OCSP responder.
-#
-# Example,
-# ocsp.enable=true
-
-#
-# Location of the OCSP responder
-#
-# By default, the location of the OCSP responder is determined implicitly
-# from the certificate being validated. This property explicitly specifies
-# the location of the OCSP responder. The property is used when the
-# Authority Information Access extension (defined in RFC 5280) is absent
-# from the certificate or when it requires overriding.
-#
-# Example,
-# ocsp.responderURL=http://ocsp.example.net:80
-
-#
-# Subject name of the OCSP responder's certificate
-#
-# By default, the certificate of the OCSP responder is that of the issuer
-# of the certificate being validated. This property identifies the certificate
-# of the OCSP responder when the default does not apply. Its value is a string
-# distinguished name (defined in RFC 2253) which identifies a certificate in
-# the set of certificates supplied during cert path validation. In cases where
-# the subject name alone is not sufficient to uniquely identify the certificate
-# then both the "ocsp.responderCertIssuerName" and
-# "ocsp.responderCertSerialNumber" properties must be used instead. When this
-# property is set then those two properties are ignored.
-#
-# Example,
-# ocsp.responderCertSubjectName=CN=OCSP Responder, O=XYZ Corp
-
-#
-# Issuer name of the OCSP responder's certificate
-#
-# By default, the certificate of the OCSP responder is that of the issuer
-# of the certificate being validated. This property identifies the certificate
-# of the OCSP responder when the default does not apply. Its value is a string
-# distinguished name (defined in RFC 2253) which identifies a certificate in
-# the set of certificates supplied during cert path validation. When this
-# property is set then the "ocsp.responderCertSerialNumber" property must also
-# be set. When the "ocsp.responderCertSubjectName" property is set then this
-# property is ignored.
-#
-# Example,
-# ocsp.responderCertIssuerName=CN=Enterprise CA, O=XYZ Corp
-
-#
-# Serial number of the OCSP responder's certificate
-#
-# By default, the certificate of the OCSP responder is that of the issuer
-# of the certificate being validated. This property identifies the certificate
-# of the OCSP responder when the default does not apply. Its value is a string
-# of hexadecimal digits (colon or space separators may be present) which
-# identifies a certificate in the set of certificates supplied during cert path
-# validation. When this property is set then the "ocsp.responderCertIssuerName"
-# property must also be set. When the "ocsp.responderCertSubjectName" property
-# is set then this property is ignored.
-#
-# Example,
-# ocsp.responderCertSerialNumber=2A:FF:00
-
-#
-# Policy for failed Kerberos KDC lookups:
-#
-# When a KDC is unavailable (network error, service failure, etc), it is
-# put inside a blacklist and accessed less often for future requests. The
-# value (case-insensitive) for this policy can be:
-#
-# tryLast
-# KDCs in the blacklist are always tried after those not on the list.
-#
-# tryLess[:max_retries,timeout]
-# KDCs in the blacklist are still tried by their order in the configuration,
-# but with smaller max_retries and timeout values. max_retries and timeout
-# are optional numerical parameters (default 1 and 5000, which means once
-# and 5 seconds). Please notes that if any of the values defined here is
-# more than what is defined in krb5.conf, it will be ignored.
-#
-# Whenever a KDC is detected as available, it is removed from the blacklist.
-# The blacklist is reset when krb5.conf is reloaded. You can add
-# refreshKrb5Config=true to a JAAS configuration file so that krb5.conf is
-# reloaded whenever a JAAS authentication is attempted.
-#
-# Example,
-# krb5.kdc.bad.policy = tryLast
-# krb5.kdc.bad.policy = tryLess:2,2000
-#
-krb5.kdc.bad.policy = tryLast
-
-#
-# Algorithm restrictions for certification path (CertPath) processing
-#
-# In some environments, certain algorithms or key lengths may be undesirable
-# for certification path building and validation. For example, "MD2" is
-# generally no longer considered to be a secure hash algorithm. This section
-# describes the mechanism for disabling algorithms based on algorithm name
-# and/or key length. This includes algorithms used in certificates, as well
-# as revocation information such as CRLs and signed OCSP Responses.
-# The syntax of the disabled algorithm string is described as follows:
-# DisabledAlgorithms:
-# " DisabledAlgorithm { , DisabledAlgorithm } "
-#
-# DisabledAlgorithm:
-# AlgorithmName [Constraint] { '&' Constraint }
-#
-# AlgorithmName:
-# (see below)
-#
-# Constraint:
-# KeySizeConstraint | CAConstraint | DenyAfterConstraint |
-# UsageConstraint
-#
-# KeySizeConstraint:
-# keySize Operator KeyLength
-#
-# Operator:
-# <= | < | == | != | >= | >
-#
-# KeyLength:
-# Integer value of the algorithm's key length in bits
-#
-# CAConstraint:
-# jdkCA
-#
-# DenyAfterConstraint:
-# denyAfter YYYY-MM-DD
-#
-# UsageConstraint:
-# usage [TLSServer] [TLSClient] [SignedJAR]
-#
-# The "AlgorithmName" is the standard algorithm name of the disabled
-# algorithm. See "Java Cryptography Architecture Standard Algorithm Name
-# Documentation" for information about Standard Algorithm Names. Matching
-# is performed using a case-insensitive sub-element matching rule. (For
-# example, in "SHA1withECDSA" the sub-elements are "SHA1" for hashing and
-# "ECDSA" for signatures.) If the assertion "AlgorithmName" is a
-# sub-element of the certificate algorithm name, the algorithm will be
-# rejected during certification path building and validation. For example,
-# the assertion algorithm name "DSA" will disable all certificate algorithms
-# that rely on DSA, such as NONEwithDSA, SHA1withDSA. However, the assertion
-# will not disable algorithms related to "ECDSA".
-#
-# A "Constraint" defines restrictions on the keys and/or certificates for
-# a specified AlgorithmName:
-#
-# KeySizeConstraint:
-# keySize Operator KeyLength
-# The constraint requires a key of a valid size range if the
-# "AlgorithmName" is of a key algorithm. The "KeyLength" indicates
-# the key size specified in number of bits. For example,
-# "RSA keySize <= 1024" indicates that any RSA key with key size less
-# than or equal to 1024 bits should be disabled, and
-# "RSA keySize < 1024, RSA keySize > 2048" indicates that any RSA key
-# with key size less than 1024 or greater than 2048 should be disabled.
-# This constraint is only used on algorithms that have a key size.
-#
-# CAConstraint:
-# jdkCA
-# This constraint prohibits the specified algorithm only if the
-# algorithm is used in a certificate chain that terminates at a marked
-# trust anchor in the lib/security/cacerts keystore. If the jdkCA
-# constraint is not set, then all chains using the specified algorithm
-# are restricted. jdkCA may only be used once in a DisabledAlgorithm
-# expression.
-# Example: To apply this constraint to SHA-1 certificates, include
-# the following: "SHA1 jdkCA"
-#
-# DenyAfterConstraint:
-# denyAfter YYYY-MM-DD
-# This constraint prohibits a certificate with the specified algorithm
-# from being used after the date regardless of the certificate's
-# validity. JAR files that are signed and timestamped before the
-# constraint date with certificates containing the disabled algorithm
-# will not be restricted. The date is processed in the UTC timezone.
-# This constraint can only be used once in a DisabledAlgorithm
-# expression.
-# Example: To deny usage of RSA 2048 bit certificates after Feb 3 2020,
-# use the following: "RSA keySize == 2048 & denyAfter 2020-02-03"
-#
-# UsageConstraint:
-# usage [TLSServer] [TLSClient] [SignedJAR]
-# This constraint prohibits the specified algorithm for
-# a specified usage. This should be used when disabling an algorithm
-# for all usages is not practical. 'TLSServer' restricts the algorithm
-# in TLS server certificate chains when server authentication is
-# performed. 'TLSClient' restricts the algorithm in TLS client
-# certificate chains when client authentication is performed.
-# 'SignedJAR' constrains use of certificates in signed jar files.
-# The usage type follows the keyword and more than one usage type can
-# be specified with a whitespace delimiter.
-# Example: "SHA1 usage TLSServer TLSClient"
-#
-# When an algorithm must satisfy more than one constraint, it must be
-# delimited by an ampersand '&'. For example, to restrict certificates in a
-# chain that terminate at a distribution provided trust anchor and contain
-# RSA keys that are less than or equal to 1024 bits, add the following
-# constraint: "RSA keySize <= 1024 & jdkCA".
-#
-# All DisabledAlgorithms expressions are processed in the order defined in the
-# property. This requires lower keysize constraints to be specified
-# before larger keysize constraints of the same algorithm. For example:
-# "RSA keySize < 1024 & jdkCA, RSA keySize < 2048".
-#
-# Note: The algorithm restrictions do not apply to trust anchors or
-# self-signed certificates.
-#
-# Note: This property is currently used by Oracle's PKIX implementation. It
-# is not guaranteed to be examined and used by other implementations.
-#
-# Example:
-# jdk.certpath.disabledAlgorithms=MD2, DSA, RSA keySize < 2048
-#
-#
-jdk.certpath.disabledAlgorithms=MD2, MD5, SHA1 jdkCA & usage TLSServer, \
- RSA keySize < 1024, DSA keySize < 1024, EC keySize < 224
-
-#
-# Algorithm restrictions for signed JAR files
-#
-# In some environments, certain algorithms or key lengths may be undesirable
-# for signed JAR validation. For example, "MD2" is generally no longer
-# considered to be a secure hash algorithm. This section describes the
-# mechanism for disabling algorithms based on algorithm name and/or key length.
-# JARs signed with any of the disabled algorithms or key sizes will be treated
-# as unsigned.
-#
-# The syntax of the disabled algorithm string is described as follows:
-# DisabledAlgorithms:
-# " DisabledAlgorithm { , DisabledAlgorithm } "
-#
-# DisabledAlgorithm:
-# AlgorithmName [Constraint] { '&' Constraint }
-#
-# AlgorithmName:
-# (see below)
-#
-# Constraint:
-# KeySizeConstraint | DenyAfterConstraint
-#
-# KeySizeConstraint:
-# keySize Operator KeyLength
-#
-# DenyAfterConstraint:
-# denyAfter YYYY-MM-DD
-#
-# Operator:
-# <= | < | == | != | >= | >
-#
-# KeyLength:
-# Integer value of the algorithm's key length in bits
-#
-# Note: This property is currently used by the JDK Reference
-# implementation. It is not guaranteed to be examined and used by other
-# implementations.
-#
-# See "jdk.certpath.disabledAlgorithms" for syntax descriptions.
-#
-jdk.jar.disabledAlgorithms=MD2, MD5, RSA keySize < 1024, \
- DSA keySize < 1024
-
-#
-# Algorithm restrictions for Secure Socket Layer/Transport Layer Security
-# (SSL/TLS/DTLS) processing
-#
-# In some environments, certain algorithms or key lengths may be undesirable
-# when using SSL/TLS/DTLS. This section describes the mechanism for disabling
-# algorithms during SSL/TLS/DTLS security parameters negotiation, including
-# protocol version negotiation, cipher suites selection, peer authentication
-# and key exchange mechanisms.
-#
-# Disabled algorithms will not be negotiated for SSL/TLS connections, even
-# if they are enabled explicitly in an application.
-#
-# For PKI-based peer authentication and key exchange mechanisms, this list
-# of disabled algorithms will also be checked during certification path
-# building and validation, including algorithms used in certificates, as
-# well as revocation information such as CRLs and signed OCSP Responses.
-# This is in addition to the jdk.certpath.disabledAlgorithms property above.
-#
-# See the specification of "jdk.certpath.disabledAlgorithms" for the
-# syntax of the disabled algorithm string.
-#
-# Note: The algorithm restrictions do not apply to trust anchors or
-# self-signed certificates.
-#
-# Note: This property is currently used by the JDK Reference implementation.
-# It is not guaranteed to be examined and used by other implementations.
-#
-# Example:
-# jdk.tls.disabledAlgorithms=MD5, SSLv3, DSA, RSA keySize < 2048
-jdk.tls.disabledAlgorithms=SSLv3, RC4, DES, MD5withRSA, DH keySize < 1024, \
- EC keySize < 224, 3DES_EDE_CBC
-
-#
-# Legacy algorithms for Secure Socket Layer/Transport Layer Security (SSL/TLS)
-# processing in JSSE implementation.
-#
-# In some environments, a certain algorithm may be undesirable but it
-# cannot be disabled because of its use in legacy applications. Legacy
-# algorithms may still be supported, but applications should not use them
-# as the security strength of legacy algorithms are usually not strong enough
-# in practice.
-#
-# During SSL/TLS security parameters negotiation, legacy algorithms will
-# not be negotiated unless there are no other candidates.
-#
-# The syntax of the legacy algorithms string is described as this Java
-# BNF-style:
-# LegacyAlgorithms:
-# " LegacyAlgorithm { , LegacyAlgorithm } "
-#
-# LegacyAlgorithm:
-# AlgorithmName (standard JSSE algorithm name)
-#
-# See the specification of security property "jdk.certpath.disabledAlgorithms"
-# for the syntax and description of the "AlgorithmName" notation.
-#
-# Per SSL/TLS specifications, cipher suites have the form:
-# SSL_KeyExchangeAlg_WITH_CipherAlg_MacAlg
-# or
-# TLS_KeyExchangeAlg_WITH_CipherAlg_MacAlg
-#
-# For example, the cipher suite TLS_RSA_WITH_AES_128_CBC_SHA uses RSA as the
-# key exchange algorithm, AES_128_CBC (128 bits AES cipher algorithm in CBC
-# mode) as the cipher (encryption) algorithm, and SHA-1 as the message digest
-# algorithm for HMAC.
-#
-# The LegacyAlgorithm can be one of the following standard algorithm names:
-# 1. JSSE cipher suite name, e.g., TLS_RSA_WITH_AES_128_CBC_SHA
-# 2. JSSE key exchange algorithm name, e.g., RSA
-# 3. JSSE cipher (encryption) algorithm name, e.g., AES_128_CBC
-# 4. JSSE message digest algorithm name, e.g., SHA
-#
-# See SSL/TLS specifications and "Java Cryptography Architecture Standard
-# Algorithm Name Documentation" for information about the algorithm names.
-#
-# Note: If a legacy algorithm is also restricted through the
-# jdk.tls.disabledAlgorithms property or the
-# java.security.AlgorithmConstraints API (See
-# javax.net.ssl.SSLParameters.setAlgorithmConstraints()),
-# then the algorithm is completely disabled and will not be negotiated.
-#
-# Note: This property is currently used by the JDK Reference implementation.
-# It is not guaranteed to be examined and used by other implementations.
-# There is no guarantee the property will continue to exist or be of the
-# same syntax in future releases.
-#
-# Example:
-# jdk.tls.legacyAlgorithms=DH_anon, DES_CBC, SSL_RSA_WITH_RC4_128_MD5
-#
-jdk.tls.legacyAlgorithms= \
- K_NULL, C_NULL, M_NULL, \
- DH_anon, ECDH_anon, \
- RC4_128, RC4_40, DES_CBC, DES40_CBC, \
- 3DES_EDE_CBC
-
-#
-# The pre-defined default finite field Diffie-Hellman ephemeral (DHE)
-# parameters for Transport Layer Security (SSL/TLS/DTLS) processing.
-#
-# In traditional SSL/TLS/DTLS connections where finite field DHE parameters
-# negotiation mechanism is not used, the server offers the client group
-# parameters, base generator g and prime modulus p, for DHE key exchange.
-# It is recommended to use dynamic group parameters. This property defines
-# a mechanism that allows you to specify custom group parameters.
-#
-# The syntax of this property string is described as this Java BNF-style:
-# DefaultDHEParameters:
-# DefinedDHEParameters { , DefinedDHEParameters }
-#
-# DefinedDHEParameters:
-# "{" DHEPrimeModulus , DHEBaseGenerator "}"
-#
-# DHEPrimeModulus:
-# HexadecimalDigits
-#
-# DHEBaseGenerator:
-# HexadecimalDigits
-#
-# HexadecimalDigits:
-# HexadecimalDigit { HexadecimalDigit }
-#
-# HexadecimalDigit: one of
-# 0 1 2 3 4 5 6 7 8 9 A B C D E F a b c d e f
-#
-# Whitespace characters are ignored.
-#
-# The "DefinedDHEParameters" defines the custom group parameters, prime
-# modulus p and base generator g, for a particular size of prime modulus p.
-# The "DHEPrimeModulus" defines the hexadecimal prime modulus p, and the
-# "DHEBaseGenerator" defines the hexadecimal base generator g of a group
-# parameter. It is recommended to use safe primes for the custom group
-# parameters.
-#
-# If this property is not defined or the value is empty, the underlying JSSE
-# provider's default group parameter is used for each connection.
-#
-# If the property value does not follow the grammar, or a particular group
-# parameter is not valid, the connection will fall back and use the
-# underlying JSSE provider's default group parameter.
-#
-# Note: This property is currently used by OpenJDK's JSSE implementation. It
-# is not guaranteed to be examined and used by other implementations.
-#
-# Example:
-# jdk.tls.server.defaultDHEParameters=
-# { \
-# FFFFFFFF FFFFFFFF C90FDAA2 2168C234 C4C6628B 80DC1CD1 \
-# 29024E08 8A67CC74 020BBEA6 3B139B22 514A0879 8E3404DD \
-# EF9519B3 CD3A431B 302B0A6D F25F1437 4FE1356D 6D51C245 \
-# E485B576 625E7EC6 F44C42E9 A637ED6B 0BFF5CB6 F406B7ED \
-# EE386BFB 5A899FA5 AE9F2411 7C4B1FE6 49286651 ECE65381 \
-# FFFFFFFF FFFFFFFF, 2}
-
-#
-# TLS key limits on symmetric cryptographic algorithms
-#
-# This security property sets limits on algorithms key usage in TLS 1.3.
-# When the amount of data encrypted exceeds the algorithm value listed below,
-# a KeyUpdate message will trigger a key change. This is for symmetric ciphers
-# with TLS 1.3 only.
-#
-# The syntax for the property is described below:
-# KeyLimits:
-# " KeyLimit { , KeyLimit } "
-#
-# WeakKeyLimit:
-# AlgorithmName Action Length
-#
-# AlgorithmName:
-# A full algorithm transformation.
-#
-# Action:
-# KeyUpdate
-#
-# Length:
-# The amount of encrypted data in a session before the Action occurs
-# This value may be an integer value in bytes, or as a power of two, 2^29.
-#
-# KeyUpdate:
-# The TLS 1.3 KeyUpdate handshake process begins when the Length amount
-# is fulfilled.
-#
-# Note: This property is currently used by OpenJDK's JSSE implementation. It
-# is not guaranteed to be examined and used by other implementations.
-#
-jdk.tls.keyLimits=AES/GCM/NoPadding KeyUpdate 2^37
-
-#
-# Cryptographic Jurisdiction Policy defaults
-#
-# Import and export control rules on cryptographic software vary from
-# country to country. By default, Java provides two different sets of
-# cryptographic policy files[1]:
-#
-# unlimited: These policy files contain no restrictions on cryptographic
-# strengths or algorithms
-#
-# limited: These policy files contain more restricted cryptographic
-# strengths
-#
-# The default setting is determined by the value of the "crypto.policy"
-# Security property below. If your country or usage requires the
-# traditional restrictive policy, the "limited" Java cryptographic
-# policy is still available and may be appropriate for your environment.
-#
-# If you have restrictions that do not fit either use case mentioned
-# above, Java provides the capability to customize these policy files.
-# The "crypto.policy" security property points to a subdirectory
-# within <java-home>/conf/security/policy/ which can be customized.
-# Please see the <java-home>/conf/security/policy/README.txt file or consult
-# the Java Security Guide/JCA documentation for more information.
-#
-# YOU ARE ADVISED TO CONSULT YOUR EXPORT/IMPORT CONTROL COUNSEL OR ATTORNEY
-# TO DETERMINE THE EXACT REQUIREMENTS.
-#
-# [1] Please note that the JCE for Java SE, including the JCE framework,
-# cryptographic policy files, and standard JCE providers provided with
-# the Java SE, have been reviewed and approved for export as mass market
-# encryption item by the US Bureau of Industry and Security.
-#
-# Note: This property is currently used by the JDK Reference implementation.
-# It is not guaranteed to be examined and used by other implementations.
-#
-crypto.policy=unlimited
-
-#
-# The policy for the XML Signature secure validation mode. The mode is
-# enabled by setting the property "org.jcp.xml.dsig.secureValidation" to
-# true with the javax.xml.crypto.XMLCryptoContext.setProperty() method,
-# or by running the code with a SecurityManager.
-#
-# Policy:
-# Constraint {"," Constraint }
-# Constraint:
-# AlgConstraint | MaxTransformsConstraint | MaxReferencesConstraint |
-# ReferenceUriSchemeConstraint | KeySizeConstraint | OtherConstraint
-# AlgConstraint
-# "disallowAlg" Uri
-# MaxTransformsConstraint:
-# "maxTransforms" Integer
-# MaxReferencesConstraint:
-# "maxReferences" Integer
-# ReferenceUriSchemeConstraint:
-# "disallowReferenceUriSchemes" String { String }
-# KeySizeConstraint:
-# "minKeySize" KeyAlg Integer
-# OtherConstraint:
-# "noDuplicateIds" | "noRetrievalMethodLoops"
-#
-# For AlgConstraint, Uri is the algorithm URI String that is not allowed.
-# See the XML Signature Recommendation for more information on algorithm
-# URI Identifiers. For KeySizeConstraint, KeyAlg is the standard algorithm
-# name of the key type (ex: "RSA"). If the MaxTransformsConstraint,
-# MaxReferencesConstraint or KeySizeConstraint (for the same key type) is
-# specified more than once, only the last entry is enforced.
-#
-# Note: This property is currently used by the JDK Reference implementation. It
-# is not guaranteed to be examined and used by other implementations.
-#
-jdk.xml.dsig.secureValidationPolicy=\
- disallowAlg http://www.w3.org/TR/1999/REC-xslt-19991116,\
- disallowAlg http://www.w3.org/2001/04/xmldsig-more#rsa-md5,\
- disallowAlg http://www.w3.org/2001/04/xmldsig-more#hmac-md5,\
- disallowAlg http://www.w3.org/2001/04/xmldsig-more#md5,\
- maxTransforms 5,\
- maxReferences 30,\
- disallowReferenceUriSchemes file http https,\
- minKeySize RSA 1024,\
- minKeySize DSA 1024,\
- minKeySize EC 224,\
- noDuplicateIds,\
- noRetrievalMethodLoops
-
-#
-# Serialization process-wide filter
-#
-# A filter, if configured, is used by java.io.ObjectInputStream during
-# deserialization to check the contents of the stream.
-# A filter is configured as a sequence of patterns, each pattern is either
-# matched against the name of a class in the stream or defines a limit.
-# Patterns are separated by ";" (semicolon).
-# Whitespace is significant and is considered part of the pattern.
-#
-# If the system property jdk.serialFilter is also specified, it supersedes
-# the security property value defined here.
-#
-# If a pattern includes a "=", it sets a limit.
-# If a limit appears more than once the last value is used.
-# Limits are checked before classes regardless of the order in the
-# sequence of patterns.
-# If any of the limits are exceeded, the filter status is REJECTED.
-#
-# maxdepth=value - the maximum depth of a graph
-# maxrefs=value - the maximum number of internal references
-# maxbytes=value - the maximum number of bytes in the input stream
-# maxarray=value - the maximum array length allowed
-#
-# Other patterns, from left to right, match the class or package name as
-# returned from Class.getName.
-# If the class is an array type, the class or package to be matched is the
-# element type.
-# Arrays of any number of dimensions are treated the same as the element type.
-# For example, a pattern of "!example.Foo", rejects creation of any instance or
-# array of example.Foo.
-#
-# If the pattern starts with "!", the status is REJECTED if the remaining
-# pattern is matched; otherwise the status is ALLOWED if the pattern matches.
-# If the pattern contains "/", the non-empty prefix up to the "/" is the
-# module name;
-# if the module name matches the module name of the class then
-# the remaining pattern is matched with the class name.
-# If there is no "/", the module name is not compared.
-# If the pattern ends with ".**" it matches any class in the package and all
-# subpackages.
-# If the pattern ends with ".*" it matches any class in the package.
-# If the pattern ends with "*", it matches any class with the pattern as a
-# prefix.
-# If the pattern is equal to the class name, it matches.
-# Otherwise, the status is UNDECIDED.
-#
-#jdk.serialFilter=pattern;pattern
-
-#
-# RMI Registry Serial Filter
-#
-# The filter pattern uses the same format as jdk.serialFilter.
-# This filter can override the builtin filter if additional types need to be
-# allowed or rejected from the RMI Registry or to decrease limits but not
-# to increase limits.
-# If the limits (maxdepth, maxrefs, or maxbytes) are exceeded, the object is rejected.
-#
-# Each non-array type is allowed or rejected if it matches one of the patterns,
-# evaluated from left to right, and is otherwise allowed. Arrays of any
-# component type, including subarrays and arrays of primitives, are allowed.
-#
-# Array construction of any component type, including subarrays and arrays of
-# primitives, are allowed unless the length is greater than the maxarray limit.
-# The filter is applied to each array element.
-#
-# Note: This property is currently used by the JDK Reference implementation.
-# It is not guaranteed to be examined and used by other implementations.
-#
-# The built-in filter allows subclasses of allowed classes and
-# can approximately be represented as the pattern:
-#
-#sun.rmi.registry.registryFilter=\
-# maxarray=1000000;\
-# maxdepth=20;\
-# java.lang.String;\
-# java.lang.Number;\
-# java.lang.reflect.Proxy;\
-# java.rmi.Remote;\
-# sun.rmi.server.UnicastRef;\
-# sun.rmi.server.RMIClientSocketFactory;\
-# sun.rmi.server.RMIServerSocketFactory;\
-# java.rmi.activation.ActivationID;\
-# java.rmi.server.UID
-#
-# RMI Distributed Garbage Collector (DGC) Serial Filter
-#
-# The filter pattern uses the same format as jdk.serialFilter.
-# This filter can override the builtin filter if additional types need to be
-# allowed or rejected from the RMI DGC.
-#
-# Note: This property is currently used by the JDK Reference implementation.
-# It is not guaranteed to be examined and used by other implementations.
-#
-# The builtin DGC filter can approximately be represented as the filter pattern:
-#
-#sun.rmi.transport.dgcFilter=\
-# java.rmi.server.ObjID;\
-# java.rmi.server.UID;\
-# java.rmi.dgc.VMID;\
-# java.rmi.dgc.Lease;\
-# maxdepth=5;maxarray=10000
-
-# CORBA ORBIorTypeCheckRegistryFilter
-# Type check enhancement for ORB::string_to_object processing
-#
-# An IOR type check filter, if configured, is used by an ORB during
-# an ORB::string_to_object invocation to check the veracity of the type encoded
-# in the ior string.
-#
-# The filter pattern consists of a semi-colon separated list of class names.
-# The configured list contains the binary class names of the IDL interface types
-# corresponding to the IDL stub class to be instantiated.
-# As such, a filter specifies a list of IDL stub classes that will be
-# allowed by an ORB when an ORB::string_to_object is invoked.
-# It is used to specify a white list configuration of acceptable
-# IDL stub types which may be contained in a stringified IOR
-# parameter passed as input to an ORB::string_to_object method.
-#
-# Note: This property is currently used by the JDK Reference implementation.
-# It is not guaranteed to be examined and used by other implementations.
-#
-#com.sun.CORBA.ORBIorTypeCheckRegistryFilter=binary_class_name;binary_class_name
-
-#
-# JCEKS Encrypted Key Serial Filter
-#
-# This filter, if configured, is used by the JCEKS KeyStore during the
-# deserialization of the encrypted Key object stored inside a key entry.
-# If not configured or the filter result is UNDECIDED (i.e. none of the patterns
-# matches), the filter configured by jdk.serialFilter will be consulted.
-#
-# If the system property jceks.key.serialFilter is also specified, it supersedes
-# the security property value defined here.
-#
-# The filter pattern uses the same format as jdk.serialFilter. The default
-# pattern allows java.lang.Enum, java.security.KeyRep, java.security.KeyRep$Type,
-# and javax.crypto.spec.SecretKeySpec and rejects all the others.
-jceks.key.serialFilter = java.base/java.lang.Enum;java.base/java.security.KeyRep;\
- java.base/java.security.KeyRep$Type;java.base/javax.crypto.spec.SecretKeySpec;!*
-
-#
-# Enhanced exception message information
-#
-# By default, exception messages should not include potentially sensitive
-# information such as file names, host names, or port numbers. This property
-# accepts one or more comma separated values, each of which represents a
-# category of enhanced exception message information to enable. Values are
-# case-insensitive. Leading and trailing whitespaces, surrounding each value,
-# are ignored. Unknown values are ignored.
-#
-# NOTE: Use caution before setting this property. Setting this property
-# exposes sensitive information in Exceptions, which could, for example,
-# propagate to untrusted code or be emitted in stack traces that are
-# inadvertently disclosed and made accessible over a public network.
-#
-# The categories are:
-#
-# hostInfo - IOExceptions thrown by java.net.Socket and the socket types in the
-# java.nio.channels package will contain enhanced exception
-# message information
-#
-# The property setting in this file can be overridden by a system property of
-# the same name, with the same syntax and possible values.
-#
-#jdk.includeInExceptions=hostInfo
git://source.jalview.org / jalview.git / blobdiff