+++ /dev/null
-#
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
-#
-# Copyright (c) 1997-2017 Oracle and/or its affiliates. All rights reserved.
-#
-# The contents of this file are subject to the terms of either the GNU
-# General Public License Version 2 only ("GPL") or the Common Development
-# and Distribution License("CDDL") (collectively, the "License"). You
-# may not use this file except in compliance with the License. You can
-# obtain a copy of the License at
-# https://oss.oracle.com/licenses/CDDL+GPL-1.1
-# or LICENSE.txt. See the License for the specific
-# language governing permissions and limitations under the License.
-#
-# When distributing the software, include this License Header Notice in each
-# file and include the License file at LICENSE.txt.
-#
-# GPL Classpath Exception:
-# Oracle designates this particular file as subject to the "Classpath"
-# exception as provided by Oracle in the GPL Version 2 section of the License
-# file that accompanied this code.
-#
-# Modifications:
-# If applicable, add the following below the License Header, with the fields
-# enclosed by brackets [] replaced by your own identifying information:
-# "Portions Copyright [year] [name of copyright owner]"
-#
-# Contributor(s):
-# If you wish your version of this file to be governed by only the CDDL or
-# only the GPL Version 2, indicate your decision by adding "[Contributor]
-# elects to include this software in this distribution under the [CDDL or GPL
-# Version 2] license." If you don't indicate a single choice of license, a
-# recipient has the option to distribute your version of this file under
-# either the CDDL, the GPL Version 2 or to extend the choice of license to
-# its licensees as provided above. However, if you add GPL Version 2 code
-# and therefore, elected the GPL Version 2 license, then the option applies
-# only if the new code is made subject to such option by the copyright
-# holder.
-#
-
-#
-# English diagnostic messages (and fragments) for Sun's XML parser.
-#
-# P-NNN ... parser messages
-# F-NNN ... message fragments (sometimes associated with more
-# than one message, but usually just with one)
-# V-NNN ... validation related messages
-#
-# Most messages can be produced in only one way.
-#
-
-
-#
-# Generic parsing messages, not specific to validation
-#
-P-000 = No parser input source!
-P-001 = Illegal character at end of document, &#x{0};
-P-002 = Expansion of entity "&{0};" is not well formed
-P-003 = Premature end of input
-# {0} - F000-F009, F011, F021.
-P-004 = Missing whitespace {0}
-P-005 = Only whitespace allowed {0}
-
- #
- # unadorned "missing whitespace", with P-004 only
- #
- # Concatenated with P-004 (P-004 + F000)
- F-000 = after element name declaration
- # Concatenated with P-004 (P-004 + F001)
- F-001 = between attribute name and type
- # Concatenated with P-004 (P-004 + F002)
- F-002 = after NOTATION type name
- # Concatenated with P-004 (P-004 + F003)
- F-003 = between attribute type and default value
- # Concatenated with P-004 (P-004 + F004)
- F-004 = after #FIXED
- # Concatenated with P-004 (P-004 + F005)
- F-005 = after <!ENTITY declaration
- # Concatenated with P-004 (P-004 + F006)
- F-006 = after % in parameter entity declaration
- # Concatenated with P-004 (P-004 + F007)
- F-007 = after entity name
- # Concatenated with P-004 (P-004 + F008)
- F-008 = before SYSTEM literal URI
- # Concatenated with P-004 (P-004 + F009)
- F-009 = after PUBLIC keyword
- # F-010 ... identifier can be reused
- # Concatenated with P-004 (P-004 + F011)
- F-011 = after notation name
- # F-012 ... identifier can be reused
- # F-013 ... identifier can be reused
-
- #
- # in declaration, in "S Name", with P-004 and P-005
- #
- F-014 = before name in <!DOCTYPE declaration
- # Concatenated with P-005 (P-005 + F015)
- F-015 = before name in <!ELEMENT declaration
- # Concatenated with P-005 (P-005 + F016)
- F-016 = before name in <!ATTLIST declaration
- # Concatenated with P-005 (P-005 + F017)
- F-017 = before name in <!ENTITY declaration
- # Concatenated with P-005 (P-005 + F018)
- F-018 = before NDATA notation name in <!ENTITY declaration
- # Concatenated with P-005 (P-005 + F019)
- F-019 = before name in <!NOTATION declaration
-
-# {0} - character
-P-006 = Name tokens must not start with "{0}" characters
-P-007 = Value must be quoted
-# {0} - character, {1} - F020-F023, F028-F032, {2} - xml entity name e.g.: Next character must be ">" terminating <!ENTITY...> declaration "%HTML.Version"
-P-008 = Next character must be "{0}" {1} {2}
-
- # Concatenated with P-008 (P-008 + F020)
- F-020 = terminating reference to entity
- # Concatenated with P-008 (P-008 + F021)
- F-021 = terminating reference to parameter entity
- # Concatenated with P-008 (P-008 + F022)
- F-022 = terminating comment
- # Concatenated with P-008 (P-008 + F023)
- F-023 = in XML Declaration
- # Concatenated with P-008 (P-008 + F024)
- F-024 = terminating internal DTD subset
- # Concatenated with P-008 (P-008 + F025)
- F-025 = terminating <!DOCTYPE ...> declaration
- # Concatenated with P-008 (P-008 + F026)
- F-026 = after attribute name
- # Concatenated with P-008 (P-008 + F027)
- F-027 = terminating element
- # Concatenated with P-008 (P-008 + F028)
- F-028 = starting content model for element
- # Concatenated with P-008 (P-008 + F029)
- F-029 = starting list of attribute NOTATIONS
- # Concatenated with P-008 (P-008 + F030)
- F-030 = beginning condition DTD subset
- # Concatenated with P-008 (P-008 + F031)
- F-031 = terminating <!ENTITY ...> declaration
- # Concatenated with P-008 (P-008 + F032)
- F-032 = terminating <!NOTATION ...> declaration
-
-P-009 = Illegal character or entity reference syntax
-
-P-010 = Only external parameter entities may use "%{0};" in entity values
-P-011 = Illegal parameter entity reference syntax
-P-012 = Use "<" for "<" in attribute values
-P-013 = Illegal reference to external entity "&{0};" in attribute
-P-014 = Reference to undefined entity "&{0};"
-# {0} - F033-F035
-P-015 = Expecting quoted value for {0}
-
- # Concatenated with P-015 (P-015 + F033)
- F-033 = PUBLIC identifier
- # Concatenated with P-015 (P-015 + F034)
- F-034 = SYSTEM identifier
- # {0} - attribute name. Concatenated with P-015 (P-015 + F033)
- F-035 = attribute value {0}
-
-P-016 = Illegal character in PUBLIC identifier: "{0}"
-P-017 = End of entity while processing comment
-P-018 = Processing instruction target is missing
-P-019 = XML declaration may only begin entities
-
-P-020 = Illegal processing instruction target: "{0}"
-P-021 = End of input inside processing instruction
-P-022 = Illegal processing instruction name, or missing whitespace
-P-023 = Illegal character "&#x{0};" ({1}) at end of XML Declaration
-P-024 = Expected "{0}=..."
-P-025 = XML version "{0}" should be declared
-P-026 = Illegal XML version string "{0}"
-P-027 = XML version "{0}" is recognized, but not "{1}"
-P-028 = Internal DTD subset must not have "<![..." constructs
-P-029 = Standalone declaration must be "yes" or "no", not "{0}"
-
-P-030 = Whitespace required before attributes
-P-031 = Attribute names must not start with "{0}" characters
-P-032 = Attribute "{0}" already appeared in this tag
-P-033 = Illegal xml:lang value "{0}"
-P-034 = Expected "</{0}>" to terminate element starting on line {1}
-P-035 = End of entity not allowed; an end tag is missing
-P-036 = ">" must terminate <!ELEMENT {0} ...> declaration, not "{1}"
-P-037 = Sequence content model must not contain "{0}"
-P-038 = Choice content model must not contain "{0}"
-P-039 = No content model may contain "{0}"
-
-P-040 = Need right parenthesis or "{1}" in content model, not "{0}"
-P-041 = Need right parenthesis, ",", or "|" in content model, not "{0}"
-# {0} - element name, {1} - character as a hex number
-P-042 = Illegal mixed content model for "{0}", next char = &#x{1};
-# {0} - element name, {1} - character e.g.: Mixed content model for "doc" must end with ")*", not "*".
-P-043 = Mixed content model for "{0}" must end with ")*", not "{1}"
-P-044 = Either an attribute declaration or ">" is expected, not "{0}"
-# {0} - attribute name, {1} - character e.g.: Illegal type (starts with "p") for attribute "xml:space"
-P-045 = Illegal type (starts with "{1}") for attribute "{0}"
-P-046 = Need keyword in conditional DTD section
-P-047 = Unterminated conditional DTD section
-P-048 = Only INCLUDE and IGNORE are allowed, not "{0}"
-P-049 = Illegal decimal character reference
-
-P-050 = Illegal hexadecimal character reference
-P-051 = Illegal XML character &#x{0};
-P-052 = Internal entity "&{0};" has characters after content
-P-053 = Unparsed entities such as "&{0};" must not be included
-P-054 = Using original entity definition for "&{0};"
-P-055 = Relative URI "{0}"; can not be resolved without a document URI
-P-056 = URI "{0}" has a fragment ID
-P-057 = Need "?>" to terminate XML declaration
-P-058 = External entity "&{0};" has characters after content
-P-059 = External parameter entity "%{0};" has characters after markup
-
-P-060 = Illegal character "{0}" in encoding name
-P-061 = Declared encoding "{0}" does not match actual one "{1}"; \
- this might not be an error
-P-062 = Notation must be PUBLIC or SYSTEM
-P-063 = Using first definition of notation "{0}"
-P-064 = Premature end of parameter entity "%{0};"
-P-065 = Entity Resolver did not provide SYSTEM id; may affect relative URIs
-# P-066 ... ID available
-P-067 = Document root element is missing
-P-068 = Notation name is required
-P-069 = Expansion of entity "{0}" is recursive
-
-P-070 = Malformed second part of surrogate pair: &#x{0};
-P-071 = Illegal XML character: &#x{0};
-P-072 = Character data cannot have "]]>"
-# Character data section starts with "<![CDATA[" and is terminated with "]]>" with text in between. No change needed.
-P-073 = EOF while parsing <
git://source.jalview.org / jalview.git / blobdiff