+++ /dev/null
-#
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
-#
-# Copyright (c) 1997-2017 Oracle and/or its affiliates. All rights reserved.
-#
-# The contents of this file are subject to the terms of either the GNU
-# General Public License Version 2 only ("GPL") or the Common Development
-# and Distribution License("CDDL") (collectively, the "License"). You
-# may not use this file except in compliance with the License. You can
-# obtain a copy of the License at
-# https://oss.oracle.com/licenses/CDDL+GPL-1.1
-# or LICENSE.txt. See the License for the specific
-# language governing permissions and limitations under the License.
-#
-# When distributing the software, include this License Header Notice in each
-# file and include the License file at LICENSE.txt.
-#
-# GPL Classpath Exception:
-# Oracle designates this particular file as subject to the "Classpath"
-# exception as provided by Oracle in the GPL Version 2 section of the License
-# file that accompanied this code.
-#
-# Modifications:
-# If applicable, add the following below the License Header, with the fields
-# enclosed by brackets [] replaced by your own identifying information:
-# "Portions Copyright [year] [name of copyright owner]"
-#
-# Contributor(s):
-# If you wish your version of this file to be governed by only the CDDL or
-# only the GPL Version 2, indicate your decision by adding "[Contributor]
-# elects to include this software in this distribution under the [CDDL or GPL
-# Version 2] license." If you don't indicate a single choice of license, a
-# recipient has the option to distribute your version of this file under
-# either the CDDL, the GPL Version 2 or to extend the choice of license to
-# its licensees as provided above. However, if you add GPL Version 2 code
-# and therefore, elected the GPL Version 2 license, then the option applies
-# only if the new code is made subject to such option by the copyright
-# holder.
-#
-
-#
-# English diagnostic messages (and fragments) for Sun's XML parser.
-#
-# P-NNN ... parser messages
-# F-NNN ... message fragments (sometimes associated with more
-# than one message, but usually just with one)
-# V-NNN ... validation related messages
-#
-# Most messages can be produced in only one way.
-#
-
-
-#
-# Generic parsing messages, not specific to validation
-#
-P-000 = N\u00E3o h\u00E1 origem da entrada do parser!
-P-001 = Caractere inv\u00E1lido no final do documento, &#x{0};
-P-002 = A expans\u00E3o da entidade "&{0};" n\u00E3o est\u00E1 formatada corretamente
-P-003 = Fim de entrada prematuro
-# {0} - F000-F009, F011, F021.
-P-004 = Espa\u00E7o em branco {0} n\u00E3o encontrado
-P-005 = Somente espa\u00E7o em branco permitido {0}
-
- #
- # unadorned "missing whitespace", with P-004 only
- #
- # Concatenated with P-004 (P-004 + F000)
- F-000 = ap\u00F3s a declara\u00E7\u00E3o do nome do elemento
- # Concatenated with P-004 (P-004 + F001)
- F-001 = entre o nome e o tipo do atributo
- # Concatenated with P-004 (P-004 + F002)
- F-002 = ap\u00F3s o nome do tipo de NOTATION
- # Concatenated with P-004 (P-004 + F003)
- F-003 = entre o tipo do atributo e o valor default
- # Concatenated with P-004 (P-004 + F004)
- F-004 = ap\u00F3s #FIXED
- # Concatenated with P-004 (P-004 + F005)
- F-005 = ap\u00F3s a declara\u00E7\u00E3o de <!ENTITY
- # Concatenated with P-004 (P-004 + F006)
- F-006 = ap\u00F3s % na declara\u00E7\u00E3o de entidade do par\u00E2metro
- # Concatenated with P-004 (P-004 + F007)
- F-007 = ap\u00F3s o nome da entidade
- # Concatenated with P-004 (P-004 + F008)
- F-008 = antes do URI literal de SYSTEM
- # Concatenated with P-004 (P-004 + F009)
- F-009 = ap\u00F3s a palavra-chave PUBLIC
- # F-010 ... identifier can be reused
- # Concatenated with P-004 (P-004 + F011)
- F-011 = ap\u00F3s o nome da nota\u00E7\u00E3o
- # F-012 ... identifier can be reused
- # F-013 ... identifier can be reused
-
- #
- # in declaration, in "S Name", with P-004 and P-005
- #
- F-014 = antes do nome na declara\u00E7\u00E3o <!DOCTYPE
- # Concatenated with P-005 (P-005 + F015)
- F-015 = antes do nome na declara\u00E7\u00E3o <!ELEMENT
- # Concatenated with P-005 (P-005 + F016)
- F-016 = antes do nome na declara\u00E7\u00E3o <!ATTLIST
- # Concatenated with P-005 (P-005 + F017)
- F-017 = antes do nome da declara\u00E7\u00E3o <!ENTITY
- # Concatenated with P-005 (P-005 + F018)
- F-018 = ates do nome de nota\u00E7\u00E3o NDATA na declara\u00E7\u00E3o <!ENTITY
- # Concatenated with P-005 (P-005 + F019)
- F-019 = antes do nome na declara\u00E7\u00E3o <!NOTATION
-
-# {0} - character
-P-006 = Os tokens de nome n\u00E3o devem come\u00E7ar com caracteres "{0}"
-P-007 = O valor n\u00E3o deve estar entre aspas
-# {0} - character, {1} - F020-F023, F028-F032, {2} - xml entity name e.g.: Next character must be ">" terminating <!ENTITY...> declaration "%HTML.Version"
-P-008 = O pr\u00F3ximo caractere deve ser "{0}" {1} {2}
-
- # Concatenated with P-008 (P-008 + F020)
- F-020 = refer\u00EAncia final \u00E0 entidade
- # Concatenated with P-008 (P-008 + F021)
- F-021 = refer\u00EAncia final \u00E0 entidade do par\u00E2metro
- # Concatenated with P-008 (P-008 + F022)
- F-022 = coment\u00E1rio final
- # Concatenated with P-008 (P-008 + F023)
- F-023 = na Declara\u00E7\u00E3o XML
- # Concatenated with P-008 (P-008 + F024)
- F-024 = subconjunto DTD interno final
- # Concatenated with P-008 (P-008 + F025)
- F-025 = declara\u00E7\u00E3o <!DOCTYPE ...> final
- # Concatenated with P-008 (P-008 + F026)
- F-026 = ap\u00F3s o nome do atributo
- # Concatenated with P-008 (P-008 + F027)
- F-027 = elemento final
- # Concatenated with P-008 (P-008 + F028)
- F-028 = iniciando modelo de conte\u00FAdo para o elemento
- # Concatenated with P-008 (P-008 + F029)
- F-029 = iniciando lista de atributo NOTATIONS
- # Concatenated with P-008 (P-008 + F030)
- F-030 = subconjunto DTD de condi\u00E7\u00E3o inicial
- # Concatenated with P-008 (P-008 + F031)
- F-031 = declara\u00E7\u00E3o <!ENTITY ...> final
- # Concatenated with P-008 (P-008 + F032)
- F-032 = declara\u00E7\u00E3o <!NOTATION ...> final
-
-P-009 = Caractere ilegal ou sintaxe de refer\u00EAncia da entidade
-
-P-010 = Somente entidades do par\u00E2metro externo podem usar "%{0};" nos valores da entidade
-P-011 = Sintaxe inv\u00E1lida de refer\u00EAncia da entidade do par\u00E2metro
-P-012 = Use "<" para "<" nos valores de atributos
-P-013 = Refer\u00EAncia inv\u00E1lida para a entidade externa "&{0};" no atributo
-P-014 = Refer\u00EAncia \u00E0 entidade indefinida "&{0};"
-# {0} - F033-F035
-P-015 = Esperando valor entre aspas para {0}
-
- # Concatenated with P-015 (P-015 + F033)
- F-033 = Identificador PUBLIC
- # Concatenated with P-015 (P-015 + F034)
- F-034 = Identificador SYSTEM
- # {0} - attribute name. Concatenated with P-015 (P-015 + F033)
- F-035 = valor do atributo {0}
-
-P-016 = Caractere inv\u00E1lido no identificador PUBLIC: "{0}"
-P-017 = Final da entidade ao processar o coment\u00E1rio
-P-018 = O destino da instru\u00E7\u00E3o de processamento n\u00E3o foi encontrado
-P-019 = A declara\u00E7\u00E3o XML s\u00F3 pode come\u00E7ar entidades
-
-P-020 = Destino inv\u00E1lido da instru\u00E7\u00E3o de processamento: "{0}"
-P-021 = Final da instru\u00E7\u00E3o de processamento de entrada interna
-P-022 = Nome inv\u00E1lido da instru\u00E7\u00E3o de processamento ou espa\u00E7o em branco n\u00E3o encontrado
-P-023 = Caractere inv\u00E1lido "&#x{0};" ({1}) no final da Declara\u00E7\u00E3o XML
-P-024 = Esperava "{0}=..."
-P-025 = A vers\u00E3o XML "{0}" deve ser declarada
-P-026 = String inv\u00E1lida da vers\u00E3o XML "{0}"
-P-027 = A vers\u00E3o XML "{0}" \u00E9 reconhecida, mas n\u00E3o "{1}"
-P-028 = O subconjunto DTD interno n\u00E3o deve ter constru\u00E7\u00F5es "<![..."
-P-029 = A declara\u00E7\u00E3o independente deve ser "sim" ou "n\u00E3o", e n\u00E3o "{0}"
-
-P-030 = Espa\u00E7o em branco obrigat\u00F3rio antes dos atributos
-P-031 = Os nomes de atributos n\u00E3o devem come\u00E7ar com "{0}" caracteres
-P-032 = O atributo "{0}" j\u00E1 apareceu nesta tag
-P-033 = Valor inv\u00E1lido de xml:lang "{0}"
-P-034 = "</{0}>" esperado para encerrar o elemento que come\u00E7a na linha {1}
-P-035 = Final da entidade n\u00E3o permitido; uma tag final n\u00E3o foi encontrada
-P-036 = ">" deve encerrar a declara\u00E7\u00E3o <!ELEMENT {0} ...>, e n\u00E3o "{1}"
-P-037 = O modelo de conte\u00FAdo da sequ\u00EAncia n\u00E3o deve conter "{0}"
-P-038 = O modelo de conte\u00FAdo da op\u00E7\u00E3o n\u00E3o deve conter "{0}"
-P-039 = Nenhum modelo de conte\u00FAdo deve conter "{0}"
-
-P-040 = \u00C9 necess\u00E1rio o par\u00EAntese direito ou "{1}" no modelo de conte\u00FAdo, e n\u00E3o "{0}"
-P-041 = \u00C9 necess\u00E1rio o par\u00EAntese direito, "," ou "|" no modelo de conte\u00FAdo, e n\u00E3o "{0}"
-# {0} - element name, {1} - character as a hex number
-P-042 = Modelo de conte\u00FAdo misto inv\u00E1lido para "{0}", o pr\u00F3ximo caractere = &#x{1};
-# {0} - element name, {1} - character e.g.: Mixed content model for "doc" must end with ")*", not "*".
-P-043 = O modelo de conte\u00FAdo misto para "{0}" deve terminar com ")*", e n\u00E3o "{1}"
-P-044 = Uma declara\u00E7\u00E3o de atributos ou ">" \u00E9 esperada, e n\u00E3o "{0}"
-# {0} - attribute name, {1} - character e.g.: Illegal type (starts with "p") for attribute "xml:space"
-P-045 = Tipo inv\u00E1lido (come\u00E7a com "{1}") para o atributo "{0}"
-P-046 = \u00C9 necess\u00E1rio a palavra-chave na se\u00E7\u00E3o DTD condicional
-P-047 = Se\u00E7\u00E3o DTD condicional n\u00E3o encerrada
-P-048 = Somente INCLUDE e IGNORE s\u00E3o permitidos, e n\u00E3o "{0}"
-P-049 = Refer\u00EAncia inv\u00E1lida do caractere decimal
-
-P-050 = Refer\u00EAncia inv\u00E1lida do caractere hexadecimal
-P-051 = Caractere XML inv\u00E1lido &#x{0};
-P-052 = A entidade interna "&{0};" tem caracteres ap\u00F3s o conte\u00FAdo
-P-053 = Entidades sem parse como "&{0};" n\u00E3o devem ser inclu\u00EDdas
-P-054 = Usando defini\u00E7\u00E3o de entidade original para "&{0};"
-P-055 = O URI relativo "{0}"; n\u00E3o pode ser resolvido sem um URI do documento
-P-056 = O URI "{0}" tem um ID de fragmento
-P-057 = \u00C9 necess\u00E1rio "?>" para encerrar a declara\u00E7\u00E3o XML
-P-058 = A entidade externa "&{0};" tem caracteres ap\u00F3s o conte\u00FAdo
-P-059 = A entidade do par\u00E2metro externo "%{0};" tem caracteres ap\u00F3s a marca\u00E7\u00E3o
-
-P-060 = Caractere inv\u00E1lido "{0}" no nome da codifica\u00E7\u00E3o
-P-061 = A codifica\u00E7\u00E3o declarada "{0}" n\u00E3o corresponde ao "{1}" real; isso pode n\u00E3o ser um erro
-P-062 = A nota\u00E7\u00E3o deve ser PUBLIC ou SYSTEM
-P-063 = Usando a primeira defini\u00E7\u00E3o da nota\u00E7\u00E3o "{0}"
-P-064 = Final prematuro da entidade do par\u00E2metro "%{0};"
-P-065 = O Resolvedor da Entidade n\u00E3o forneceu o id do SYSTEM; pode afetar URIs relativos
-# P-066 ... ID available
-P-067 = O elemento raiz do documento n\u00E3o foi encontrado
-P-068 = Nome da nota\u00E7\u00E3o obrigat\u00F3rio
-P-069 = A expans\u00E3o da entidade "{0}" \u00E9 recursiva
-
-P-070 = Segunda parte incorreta do par substituto: &#x{0};
-P-071 = Caractere XML inv\u00E1lido: &#x{0};
-P-072 = Os dados do caractere n\u00E3o podem ter "]]>"
-# Character data section starts with "<![CDATA[" and is terminated with "]]>" with text in between. No change needed.
-P-073 = EOF ao fazer parse da se\u00E7\u00E3o <
git://source.jalview.org / jalview.git / blobdiff