--- /dev/null
+
+/* ppport.h -- Perl/Pollution/Portability Version 2.0002
+ *
+ * Automatically Created by Devel::PPPort on Thu Jul 24 17:34:30 2003
+ *
+ * Do NOT edit this file directly! -- Edit PPPort.pm instead.
+ *
+ * Version 2.x, Copyright (C) 2001, Paul Marquess.
+ * Version 1.x, Copyright (C) 1999, Kenneth Albanowski.
+ * This code may be used and distributed under the same license as any
+ * version of Perl.
+ *
+ * This version of ppport.h is designed to support operation with Perl
+ * installations back to 5.004, and has been tested up to 5.8.0.
+ *
+ * If this version of ppport.h is failing during the compilation of this
+ * module, please check if a newer version of Devel::PPPort is available
+ * on CPAN before sending a bug report.
+ *
+ * If you are using the latest version of Devel::PPPort and it is failing
+ * during compilation of this module, please send a report to perlbug@perl.com
+ *
+ * Include all following information:
+ *
+ * 1. The complete output from running "perl -V"
+ *
+ * 2. This file.
+ *
+ * 3. The name & version of the module you were trying to build.
+ *
+ * 4. A full log of the build that failed.
+ *
+ * 5. Any other information that you think could be relevant.
+ *
+ *
+ * For the latest version of this code, please retreive the Devel::PPPort
+ * module from CPAN.
+ *
+ */
+
+/*
+ * In order for a Perl extension module to be as portable as possible
+ * across differing versions of Perl itself, certain steps need to be taken.
+ * Including this header is the first major one, then using dTHR is all the
+ * appropriate places and using a PL_ prefix to refer to global Perl
+ * variables is the second.
+ *
+ */
+
+
+/* If you use one of a few functions that were not present in earlier
+ * versions of Perl, please add a define before the inclusion of ppport.h
+ * for a static include, or use the GLOBAL request in a single module to
+ * produce a global definition that can be referenced from the other
+ * modules.
+ *
+ * Function: Static define: Extern define:
+ * newCONSTSUB() NEED_newCONSTSUB NEED_newCONSTSUB_GLOBAL
+ *
+ */
+
+
+/* To verify whether ppport.h is needed for your module, and whether any
+ * special defines should be used, ppport.h can be run through Perl to check
+ * your source code. Simply say:
+ *
+ * perl -x ppport.h *.c *.h *.xs foo/bar*.c [etc]
+ *
+ * The result will be a list of patches suggesting changes that should at
+ * least be acceptable, if not necessarily the most efficient solution, or a
+ * fix for all possible problems. It won't catch where dTHR is needed, and
+ * doesn't attempt to account for global macro or function definitions,
+ * nested includes, typemaps, etc.
+ *
+ * In order to test for the need of dTHR, please try your module under a
+ * recent version of Perl that has threading compiled-in.
+ *
+ */
+
+
+/*
+#!/usr/bin/perl
+@ARGV = ("*.xs") if !@ARGV;
+%badmacros = %funcs = %macros = (); $replace = 0;
+foreach (<DATA>) {
+ $funcs{$1} = 1 if /Provide:\s+(\S+)/;
+ $macros{$1} = 1 if /^#\s*define\s+([a-zA-Z0-9_]+)/;
+ $replace = $1 if /Replace:\s+(\d+)/;
+ $badmacros{$2}=$1 if $replace and /^#\s*define\s+([a-zA-Z0-9_]+).*?\s+([a-zA-Z0-9_]+)/;
+ $badmacros{$1}=$2 if /Replace (\S+) with (\S+)/;
+}
+foreach $filename (map(glob($_),@ARGV)) {
+ unless (open(IN, "<$filename")) {
+ warn "Unable to read from $file: $!\n";
+ next;
+ }
+ print "Scanning $filename...\n";
+ $c = ""; while (<IN>) { $c .= $_; } close(IN);
+ $need_include = 0; %add_func = (); $changes = 0;
+ $has_include = ($c =~ /#.*include.*ppport/m);
+
+ foreach $func (keys %funcs) {
+ if ($c =~ /#.*define.*\bNEED_$func(_GLOBAL)?\b/m) {
+ if ($c !~ /\b$func\b/m) {
+ print "If $func isn't needed, you don't need to request it.\n" if
+ $changes += ($c =~ s/^.*#.*define.*\bNEED_$func\b.*\n//m);
+ } else {
+ print "Uses $func\n";
+ $need_include = 1;
+ }
+ } else {
+ if ($c =~ /\b$func\b/m) {
+ $add_func{$func} =1 ;
+ print "Uses $func\n";
+ $need_include = 1;
+ }
+ }
+ }
+
+ if (not $need_include) {
+ foreach $macro (keys %macros) {
+ if ($c =~ /\b$macro\b/m) {
+ print "Uses $macro\n";
+ $need_include = 1;
+ }
+ }
+ }
+
+ foreach $badmacro (keys %badmacros) {
+ if ($c =~ /\b$badmacro\b/m) {
+ $changes += ($c =~ s/\b$badmacro\b/$badmacros{$badmacro}/gm);
+ print "Uses $badmacros{$badmacro} (instead of $badmacro)\n";
+ $need_include = 1;
+ }
+ }
+
+ if (scalar(keys %add_func) or $need_include != $has_include) {
+ if (!$has_include) {
+ $inc = join('',map("#define NEED_$_\n", sort keys %add_func)).
+ "#include \"ppport.h\"\n";
+ $c = "$inc$c" unless $c =~ s/#.*include.*XSUB.*\n/$&$inc/m;
+ } elsif (keys %add_func) {
+ $inc = join('',map("#define NEED_$_\n", sort keys %add_func));
+ $c = "$inc$c" unless $c =~ s/^.*#.*include.*ppport.*$/$inc$&/m;
+ }
+ if (!$need_include) {
+ print "Doesn't seem to need ppport.h.\n";
+ $c =~ s/^.*#.*include.*ppport.*\n//m;
+ }
+ $changes++;
+ }
+
+ if ($changes) {
+ open(OUT,">/tmp/ppport.h.$$");
+ print OUT $c;
+ close(OUT);
+ open(DIFF, "diff -u $filename /tmp/ppport.h.$$|");
+ while (<DIFF>) { s!/tmp/ppport\.h\.$$!$filename.patched!; print STDOUT; }
+ close(DIFF);
+ unlink("/tmp/ppport.h.$$");
+ } else {
+ print "Looks OK\n";
+ }
+}
+__DATA__
+*/
+
+#ifndef _P_P_PORTABILITY_H_
+#define _P_P_PORTABILITY_H_
+
+#ifndef PERL_REVISION
+# ifndef __PATCHLEVEL_H_INCLUDED__
+# include "patchlevel.h"
+# endif
+# ifndef PERL_REVISION
+# define PERL_REVISION (5)
+ /* Replace: 1 */
+# define PERL_VERSION PATCHLEVEL
+# define PERL_SUBVERSION SUBVERSION
+ /* Replace PERL_PATCHLEVEL with PERL_VERSION */
+ /* Replace: 0 */
+# endif
+#endif
+
+#define PERL_BCDVERSION ((PERL_REVISION * 0x1000000L) + (PERL_VERSION * 0x1000L) + PERL_SUBVERSION)
+
+/* It is very unlikely that anyone will try to use this with Perl 6
+ (or greater), but who knows.
+ */
+#if PERL_REVISION != 5
+# error ppport.h only works with Perl version 5
+#endif /* PERL_REVISION != 5 */
+
+#ifndef ERRSV
+# define ERRSV perl_get_sv("@",FALSE)
+#endif
+
+#if (PERL_VERSION < 4) || ((PERL_VERSION == 4) && (PERL_SUBVERSION <= 5))
+/* Replace: 1 */
+# define PL_Sv Sv
+# define PL_compiling compiling
+# define PL_copline copline
+# define PL_curcop curcop
+# define PL_curstash curstash
+# define PL_defgv defgv
+# define PL_dirty dirty
+# define PL_dowarn dowarn
+# define PL_hints hints
+# define PL_na na
+# define PL_perldb perldb
+# define PL_rsfp_filters rsfp_filters
+# define PL_rsfpv rsfp
+# define PL_stdingv stdingv
+# define PL_sv_no sv_no
+# define PL_sv_undef sv_undef
+# define PL_sv_yes sv_yes
+/* Replace: 0 */
+#endif
+
+#ifdef HASATTRIBUTE
+# if defined(__GNUC__) && defined(__cplusplus)
+# define PERL_UNUSED_DECL
+# else
+# define PERL_UNUSED_DECL __attribute__((unused))
+# endif
+#else
+# define PERL_UNUSED_DECL
+#endif
+
+#ifndef dNOOP
+# define NOOP (void)0
+# define dNOOP extern int Perl___notused PERL_UNUSED_DECL
+#endif
+
+#ifndef dTHR
+# define dTHR dNOOP
+#endif
+
+#ifndef dTHX
+# define dTHX dNOOP
+# define dTHXa(x) dNOOP
+# define dTHXoa(x) dNOOP
+#endif
+
+#ifndef pTHX
+# define pTHX void
+# define pTHX_
+# define aTHX
+# define aTHX_
+#endif
+
+#ifndef UVSIZE
+# define UVSIZE IVSIZE
+#endif
+
+#ifndef NVTYPE
+# if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE)
+# define NVTYPE long double
+# else
+# define NVTYPE double
+# endif
+typedef NVTYPE NV;
+#endif
+
+#ifndef INT2PTR
+
+#if (IVSIZE == PTRSIZE) && (UVSIZE == PTRSIZE)
+# define PTRV UV
+# define INT2PTR(any,d) (any)(d)
+#else
+# if PTRSIZE == LONGSIZE
+# define PTRV unsigned long
+# else
+# define PTRV unsigned
+# endif
+# define INT2PTR(any,d) (any)(PTRV)(d)
+#endif
+#define NUM2PTR(any,d) (any)(PTRV)(d)
+#define PTR2IV(p) INT2PTR(IV,p)
+#define PTR2UV(p) INT2PTR(UV,p)
+#define PTR2NV(p) NUM2PTR(NV,p)
+#if PTRSIZE == LONGSIZE
+# define PTR2ul(p) (unsigned long)(p)
+#else
+# define PTR2ul(p) INT2PTR(unsigned long,p)
+#endif
+
+#endif /* !INT2PTR */
+
+#ifndef boolSV
+# define boolSV(b) ((b) ? &PL_sv_yes : &PL_sv_no)
+#endif
+
+#ifndef gv_stashpvn
+# define gv_stashpvn(str,len,flags) gv_stashpv(str,flags)
+#endif
+
+#ifndef newSVpvn
+# define newSVpvn(data,len) ((len) ? newSVpv ((data), (len)) : newSVpv ("", 0))
+#endif
+
+#ifndef newRV_inc
+/* Replace: 1 */
+# define newRV_inc(sv) newRV(sv)
+/* Replace: 0 */
+#endif
+
+/* DEFSV appears first in 5.004_56 */
+#ifndef DEFSV
+# define DEFSV GvSV(PL_defgv)
+#endif
+
+#ifndef SAVE_DEFSV
+# define SAVE_DEFSV SAVESPTR(GvSV(PL_defgv))
+#endif
+
+#ifndef newRV_noinc
+# ifdef __GNUC__
+# define newRV_noinc(sv) \
+ ({ \
+ SV *nsv = (SV*)newRV(sv); \
+ SvREFCNT_dec(sv); \
+ nsv; \
+ })
+# else
+# if defined(USE_THREADS)
+static SV * newRV_noinc (SV * sv)
+{
+ SV *nsv = (SV*)newRV(sv);
+ SvREFCNT_dec(sv);
+ return nsv;
+}
+# else
+# define newRV_noinc(sv) \
+ (PL_Sv=(SV*)newRV(sv), SvREFCNT_dec(sv), (SV*)PL_Sv)
+# endif
+# endif
+#endif
+
+/* Provide: newCONSTSUB */
+
+/* newCONSTSUB from IO.xs is in the core starting with 5.004_63 */
+#if (PERL_VERSION < 4) || ((PERL_VERSION == 4) && (PERL_SUBVERSION < 63))
+
+#if defined(NEED_newCONSTSUB)
+static
+#else
+extern void newCONSTSUB(HV * stash, char * name, SV *sv);
+#endif
+
+#if defined(NEED_newCONSTSUB) || defined(NEED_newCONSTSUB_GLOBAL)
+void
+newCONSTSUB(stash,name,sv)
+HV *stash;
+char *name;
+SV *sv;
+{
+ U32 oldhints = PL_hints;
+ HV *old_cop_stash = PL_curcop->cop_stash;
+ HV *old_curstash = PL_curstash;
+ line_t oldline = PL_curcop->cop_line;
+ PL_curcop->cop_line = PL_copline;
+
+ PL_hints &= ~HINT_BLOCK_SCOPE;
+ if (stash)
+ PL_curstash = PL_curcop->cop_stash = stash;
+
+ newSUB(
+
+#if (PERL_VERSION < 3) || ((PERL_VERSION == 3) && (PERL_SUBVERSION < 22))
+ /* before 5.003_22 */
+ start_subparse(),
+#else
+# if (PERL_VERSION == 3) && (PERL_SUBVERSION == 22)
+ /* 5.003_22 */
+ start_subparse(0),
+# else
+ /* 5.003_23 onwards */
+ start_subparse(FALSE, 0),
+# endif
+#endif
+
+ newSVOP(OP_CONST, 0, newSVpv(name,0)),
+ newSVOP(OP_CONST, 0, &PL_sv_no), /* SvPV(&PL_sv_no) == "" -- GMB */
+ newSTATEOP(0, Nullch, newSVOP(OP_CONST, 0, sv))
+ );
+
+ PL_hints = oldhints;
+ PL_curcop->cop_stash = old_cop_stash;
+ PL_curstash = old_curstash;
+ PL_curcop->cop_line = oldline;
+}
+#endif
+
+#endif /* newCONSTSUB */
+
+#ifndef START_MY_CXT
+
+/*
+ * Boilerplate macros for initializing and accessing interpreter-local
+ * data from C. All statics in extensions should be reworked to use
+ * this, if you want to make the extension thread-safe. See ext/re/re.xs
+ * for an example of the use of these macros.
+ *
+ * Code that uses these macros is responsible for the following:
+ * 1. #define MY_CXT_KEY to a unique string, e.g. "DynaLoader_guts"
+ * 2. Declare a typedef named my_cxt_t that is a structure that contains
+ * all the data that needs to be interpreter-local.
+ * 3. Use the START_MY_CXT macro after the declaration of my_cxt_t.
+ * 4. Use the MY_CXT_INIT macro such that it is called exactly once
+ * (typically put in the BOOT: section).
+ * 5. Use the members of the my_cxt_t structure everywhere as
+ * MY_CXT.member.
+ * 6. Use the dMY_CXT macro (a declaration) in all the functions that
+ * access MY_CXT.
+ */
+
+#if defined(MULTIPLICITY) || defined(PERL_OBJECT) || \
+ defined(PERL_CAPI) || defined(PERL_IMPLICIT_CONTEXT)
+
+/* This must appear in all extensions that define a my_cxt_t structure,
+ * right after the definition (i.e. at file scope). The non-threads
+ * case below uses it to declare the data as static. */
+#define START_MY_CXT
+
+#if (PERL_VERSION < 4 || (PERL_VERSION == 4 && PERL_SUBVERSION < 68 ))
+/* Fetches the SV that keeps the per-interpreter data. */
+#define dMY_CXT_SV \
+ SV *my_cxt_sv = perl_get_sv(MY_CXT_KEY, FALSE)
+#else /* >= perl5.004_68 */
+#define dMY_CXT_SV \
+ SV *my_cxt_sv = *hv_fetch(PL_modglobal, MY_CXT_KEY, \
+ sizeof(MY_CXT_KEY)-1, TRUE)
+#endif /* < perl5.004_68 */
+
+/* This declaration should be used within all functions that use the
+ * interpreter-local data. */
+#define dMY_CXT \
+ dMY_CXT_SV; \
+ my_cxt_t *my_cxtp = INT2PTR(my_cxt_t*,SvUV(my_cxt_sv))
+
+/* Creates and zeroes the per-interpreter data.
+ * (We allocate my_cxtp in a Perl SV so that it will be released when
+ * the interpreter goes away.) */
+#define MY_CXT_INIT \
+ dMY_CXT_SV; \
+ /* newSV() allocates one more than needed */ \
+ my_cxt_t *my_cxtp = (my_cxt_t*)SvPVX(newSV(sizeof(my_cxt_t)-1));\
+ Zero(my_cxtp, 1, my_cxt_t); \
+ sv_setuv(my_cxt_sv, PTR2UV(my_cxtp))
+
+/* This macro must be used to access members of the my_cxt_t structure.
+ * e.g. MYCXT.some_data */
+#define MY_CXT (*my_cxtp)
+
+/* Judicious use of these macros can reduce the number of times dMY_CXT
+ * is used. Use is similar to pTHX, aTHX etc. */
+#define pMY_CXT my_cxt_t *my_cxtp
+#define pMY_CXT_ pMY_CXT,
+#define _pMY_CXT ,pMY_CXT
+#define aMY_CXT my_cxtp
+#define aMY_CXT_ aMY_CXT,
+#define _aMY_CXT ,aMY_CXT
+
+#else /* single interpreter */
+
+
+#define START_MY_CXT static my_cxt_t my_cxt;
+#define dMY_CXT_SV dNOOP
+#define dMY_CXT dNOOP
+#define MY_CXT_INIT NOOP
+#define MY_CXT my_cxt
+
+#define pMY_CXT void
+#define pMY_CXT_
+#define _pMY_CXT
+#define aMY_CXT
+#define aMY_CXT_
+#define _aMY_CXT
+
+#endif
+
+#endif /* START_MY_CXT */
+
+#ifndef IVdf
+# if IVSIZE == LONGSIZE
+# define IVdf "ld"
+# define UVuf "lu"
+# define UVof "lo"
+# define UVxf "lx"
+# define UVXf "lX"
+# else
+# if IVSIZE == INTSIZE
+# define IVdf "d"
+# define UVuf "u"
+# define UVof "o"
+# define UVxf "x"
+# define UVXf "X"
+# endif
+# endif
+#endif
+
+#ifndef NVef
+# if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE) && \
+ defined(PERL_PRIfldbl) /* Not very likely, but let's try anyway. */
+# define NVef PERL_PRIeldbl
+# define NVff PERL_PRIfldbl
+# define NVgf PERL_PRIgldbl
+# else
+# define NVef "e"
+# define NVff "f"
+# define NVgf "g"
+# endif
+#endif
+
+#ifndef AvFILLp /* Older perls (<=5.003) lack AvFILLp */
+# define AvFILLp AvFILL
+#endif
+
+#ifdef SvPVbyte
+# if PERL_REVISION == 5 && PERL_VERSION < 7
+ /* SvPVbyte does not work in perl-5.6.1, borrowed version for 5.7.3 */
+# undef SvPVbyte
+# define SvPVbyte(sv, lp) \
+ ((SvFLAGS(sv) & (SVf_POK|SVf_UTF8)) == (SVf_POK) \
+ ? ((lp = SvCUR(sv)), SvPVX(sv)) : my_sv_2pvbyte(aTHX_ sv, &lp))
+ static char *
+ my_sv_2pvbyte(pTHX_ register SV *sv, STRLEN *lp)
+ {
+ sv_utf8_downgrade(sv,0);
+ return SvPV(sv,*lp);
+ }
+# endif
+#else
+# define SvPVbyte SvPV
+#endif
+
+#endif /* _P_P_PORTABILITY_H_ */
+
+/* End of File ppport.h */
git://source.jalview.org / jpred.git / blobdiff