JWS-117 Compiled all tools with ./compilebin.sh and some were missing related files.
[jabaws.git] / binaries / src / ViennaRNA / interfaces / Makefile
diff --git a/binaries/src/ViennaRNA/interfaces/Makefile b/binaries/src/ViennaRNA/interfaces/Makefile
new file mode 100644 (file)
index 0000000..a44998d
--- /dev/null
@@ -0,0 +1,597 @@
+# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# interfaces/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \  ]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
+pkgdatadir = $(datadir)/ViennaRNA
+pkgincludedir = $(includedir)/ViennaRNA
+pkglibdir = $(libdir)/ViennaRNA
+pkglibexecdir = $(libexecdir)/ViennaRNA
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-unknown-linux-gnu
+host_triplet = x86_64-unknown-linux-gnu
+subdir = interfaces
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+       $(top_srcdir)/m4/package.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+       $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN   " $@;
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+       html-recursive info-recursive install-data-recursive \
+       install-dvi-recursive install-exec-recursive \
+       install-html-recursive install-info-recursive \
+       install-pdf-recursive install-ps-recursive install-recursive \
+       installcheck-recursive installdirs-recursive pdf-recursive \
+       ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive        \
+  distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+       $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+       distdir
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = ${SHELL} /homes/fmmarquesmadeira/Projects/jabaws/binaries/src/ViennaRNA/config/missing --run aclocal-1.11
+AMTAR = $${TAR-tar}
+AM_DEFAULT_VERBOSITY = 0
+AUTOCONF = ${SHELL} /homes/fmmarquesmadeira/Projects/jabaws/binaries/src/ViennaRNA/config/missing --run autoconf
+AUTOHEADER = ${SHELL} /homes/fmmarquesmadeira/Projects/jabaws/binaries/src/ViennaRNA/config/missing --run autoheader
+AUTOMAKE = ${SHELL} /homes/fmmarquesmadeira/Projects/jabaws/binaries/src/ViennaRNA/config/missing --run automake-1.11
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS = -g -O2
+CLUSTER_DIR = 
+CPP = gcc -E
+CPPFLAGS = 
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS = -g -O2
+CXXLD = g++
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DOXYGEN_CMD_LATEX = /usr/bin/latex
+DOXYGEN_CMD_MAKEINDEX = /usr/bin/makeindex
+DOXYGEN_CONF = doxygen.conf
+DOXYGEN_DOCDIR = doc
+DOXYGEN_GENERATE_HTML = YES
+DOXYGEN_GENERATE_LATEX = YES
+DOXYGEN_HAVE_DOT = YES
+DOXYGEN_PROJECT_NAME = RNAlib-2.1.2
+DOXYGEN_SRCDIR = .
+DOXYGEN_WITH_PDFLATEX = YES
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FPIC = -fpic
+GREP = /bin/grep
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+ISODATE = 2017-04-11
+LDFLAGS = 
+LIBOBJS = 
+LIBS = -lm 
+LIBSVM_DIR = libsvm-2.91
+LTLIBOBJS = 
+MAKEINFO = ${SHELL} /homes/fmmarquesmadeira/Projects/jabaws/binaries/src/ViennaRNA/config/missing --run makeinfo
+MKDIR_P = /bin/mkdir -p
+OBJEXT = o
+OPENMP_CFLAGS = -fopenmp
+PACKAGE = ViennaRNA
+PACKAGE_BUGREPORT = rna@tbi.univie.ac.at
+PACKAGE_NAME = ViennaRNA
+PACKAGE_STRING = ViennaRNA 2.1.2
+PACKAGE_TARNAME = ViennaRNA
+PACKAGE_URL = http://www.tbi.univie.ac.a/~ivo/RNA
+PACKAGE_VERSION = 2.1.2
+PATH_SEPARATOR = :
+PERLPREFIX = 
+PERL_INTERFACE = Perl
+POW_LIB = 
+PYTHON_INTERFACE = 
+PerlCmd = /usr/bin/perl
+PythonCmd = /homes/fmmarquesmadeira/.local/anaconda/envs/python3/bin/python
+RANLIB = ranlib
+REFERENCE_MANUAL_PDF_NAME = RNAlib-2.1.2.pdf
+REFERENCE_MANUAL_TAGFILE = RNAlib-2.1.2.tag
+SET_MAKE = 
+SHELL = /bin/sh
+STRIP = 
+VERSION = 2.1.2
+abs_builddir = /homes/fmmarquesmadeira/Projects/jabaws/binaries/src/ViennaRNA/interfaces
+abs_srcdir = /homes/fmmarquesmadeira/Projects/jabaws/binaries/src/ViennaRNA/interfaces
+abs_top_builddir = /homes/fmmarquesmadeira/Projects/jabaws/binaries/src/ViennaRNA
+abs_top_srcdir = /homes/fmmarquesmadeira/Projects/jabaws/binaries/src/ViennaRNA
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = $${TAR-tar} chof - "$$tardir"
+am__untar = $${TAR-tar} xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-unknown-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = unknown
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dot = /usr/bin/dot
+doxygen = /usr/bin/doxygen
+dvidir = ${docdir}
+egrep = /bin/egrep
+exec_prefix = ${prefix}
+host = x86_64-unknown-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = unknown
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /homes/fmmarquesmadeira/Projects/jabaws/binaries/src/ViennaRNA/config/install-sh
+latex = /usr/bin/latex
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+makeindex = /usr/bin/makeindex
+mandir = ${datarootdir}/man
+mkdir_p = /bin/mkdir -p
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+pdflatex = no
+perl = /usr/bin/perl
+prefix = /usr/local
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+subdirs =  Kinfold RNAforester
+sysconfdir = ${prefix}/etc
+target_alias = 
+top_build_prefix = ../
+top_builddir = ..
+top_srcdir = ..
+SUBDIRS = Perl  # @RUBY_INTERFACE@
+SOURCES = RNA.i ptr2array.i tmaps.i
+EXTRA_DIST = RNA.i tmaps.i ptr2array.i
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+       @for dep in $?; do \
+         case '$(am__configure_deps)' in \
+           *$$dep*) \
+             ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+               && { if test -f $@; then exit 0; else break; fi; }; \
+             exit 1;; \
+         esac; \
+       done; \
+       echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu interfaces/Makefile'; \
+       $(am__cd) $(top_srcdir) && \
+         $(AUTOMAKE) --gnu interfaces/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+       @case '$?' in \
+         *config.status*) \
+           cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+         *) \
+           echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+           cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+       esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+       cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+       cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+       cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+       @fail= failcom='exit 1'; \
+       for f in x $$MAKEFLAGS; do \
+         case $$f in \
+           *=* | --[!k]*);; \
+           *k*) failcom='fail=yes';; \
+         esac; \
+       done; \
+       dot_seen=no; \
+       target=`echo $@ | sed s/-recursive//`; \
+       list='$(SUBDIRS)'; for subdir in $$list; do \
+         echo "Making $$target in $$subdir"; \
+         if test "$$subdir" = "."; then \
+           dot_seen=yes; \
+           local_target="$$target-am"; \
+         else \
+           local_target="$$target"; \
+         fi; \
+         ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+         || eval $$failcom; \
+       done; \
+       if test "$$dot_seen" = "no"; then \
+         $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+       fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+       @fail= failcom='exit 1'; \
+       for f in x $$MAKEFLAGS; do \
+         case $$f in \
+           *=* | --[!k]*);; \
+           *k*) failcom='fail=yes';; \
+         esac; \
+       done; \
+       dot_seen=no; \
+       case "$@" in \
+         distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+         *) list='$(SUBDIRS)' ;; \
+       esac; \
+       rev=''; for subdir in $$list; do \
+         if test "$$subdir" = "."; then :; else \
+           rev="$$subdir $$rev"; \
+         fi; \
+       done; \
+       rev="$$rev ."; \
+       target=`echo $@ | sed s/-recursive//`; \
+       for subdir in $$rev; do \
+         echo "Making $$target in $$subdir"; \
+         if test "$$subdir" = "."; then \
+           local_target="$$target-am"; \
+         else \
+           local_target="$$target"; \
+         fi; \
+         ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+         || eval $$failcom; \
+       done && test -z "$$fail"
+tags-recursive:
+       list='$(SUBDIRS)'; for subdir in $$list; do \
+         test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+       done
+ctags-recursive:
+       list='$(SUBDIRS)'; for subdir in $$list; do \
+         test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+       done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+       list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+       unique=`for i in $$list; do \
+           if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+         done | \
+         $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+             END { if (nonempty) { for (i in files) print i; }; }'`; \
+       mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+               $(TAGS_FILES) $(LISP)
+       set x; \
+       here=`pwd`; \
+       if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+         include_option=--etags-include; \
+         empty_fix=.; \
+       else \
+         include_option=--include; \
+         empty_fix=; \
+       fi; \
+       list='$(SUBDIRS)'; for subdir in $$list; do \
+         if test "$$subdir" = .; then :; else \
+           test ! -f $$subdir/TAGS || \
+             set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+         fi; \
+       done; \
+       list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+       unique=`for i in $$list; do \
+           if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+         done | \
+         $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+             END { if (nonempty) { for (i in files) print i; }; }'`; \
+       shift; \
+       if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+         test -n "$$unique" || unique=$$empty_fix; \
+         if test $$# -gt 0; then \
+           $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+             "$$@" $$unique; \
+         else \
+           $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+             $$unique; \
+         fi; \
+       fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+               $(TAGS_FILES) $(LISP)
+       list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+       unique=`for i in $$list; do \
+           if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+         done | \
+         $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+             END { if (nonempty) { for (i in files) print i; }; }'`; \
+       test -z "$(CTAGS_ARGS)$$unique" \
+         || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+            $$unique
+
+GTAGS:
+       here=`$(am__cd) $(top_builddir) && pwd` \
+         && $(am__cd) $(top_srcdir) \
+         && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+       -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+       @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+       topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+       list='$(DISTFILES)'; \
+         dist_files=`for file in $$list; do echo $$file; done | \
+         sed -e "s|^$$srcdirstrip/||;t" \
+             -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+       case $$dist_files in \
+         */*) $(MKDIR_P) `echo "$$dist_files" | \
+                          sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+                          sort -u` ;; \
+       esac; \
+       for file in $$dist_files; do \
+         if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+         if test -d $$d/$$file; then \
+           dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+           if test -d "$(distdir)/$$file"; then \
+             find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+           fi; \
+           if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+             cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+             find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+           fi; \
+           cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+         else \
+           test -f "$(distdir)/$$file" \
+           || cp -p $$d/$$file "$(distdir)/$$file" \
+           || exit 1; \
+         fi; \
+       done
+       @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+         if test "$$subdir" = .; then :; else \
+           $(am__make_dryrun) \
+             || test -d "$(distdir)/$$subdir" \
+             || $(MKDIR_P) "$(distdir)/$$subdir" \
+             || exit 1; \
+           dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+           $(am__relativize); \
+           new_distdir=$$reldir; \
+           dir1=$$subdir; dir2="$(top_distdir)"; \
+           $(am__relativize); \
+           new_top_distdir=$$reldir; \
+           echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+           echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+           ($(am__cd) $$subdir && \
+             $(MAKE) $(AM_MAKEFLAGS) \
+               top_distdir="$$new_top_distdir" \
+               distdir="$$new_distdir" \
+               am__remove_distdir=: \
+               am__skip_length_check=: \
+               am__skip_mode_fix=: \
+               distdir) \
+             || exit 1; \
+         fi; \
+       done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+       @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+       if test -z '$(STRIP)'; then \
+         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+             install; \
+       else \
+         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+           "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+       fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+       -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+       -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+       @echo "This command is intended for maintainers to use"
+       @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+       -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+       -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+       install-am install-strip tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+       all all-am check check-am clean clean-generic ctags \
+       ctags-recursive distclean distclean-generic distclean-tags \
+       distdir dvi dvi-am html html-am info info-am install \
+       install-am install-data install-data-am install-dvi \
+       install-dvi-am install-exec install-exec-am install-html \
+       install-html-am install-info install-info-am install-man \
+       install-pdf install-pdf-am install-ps install-ps-am \
+       install-strip installcheck installcheck-am installdirs \
+       installdirs-am maintainer-clean maintainer-clean-generic \
+       mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
+       tags-recursive uninstall uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: