--- /dev/null
+# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# m4/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+pkgdatadir = $(datadir)/clustalw
+pkglibdir = $(libdir)/clustalw
+pkgincludedir = $(includedir)/clustalw
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = i386-apple-darwin10.6.0
+host_triplet = i386-apple-darwin10.6.0
+target_triplet = i386-apple-darwin10.6.0
+subdir = m4
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(m4datadir)"
+m4dataDATA_INSTALL = $(INSTALL_DATA)
+DATA = $(m4data_DATA)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /Users/jimp/jaba/apache-tomcat-6.0.28/webapps/jaba/binaries/src/clustalw/missing --run aclocal-1.10
+AMTAR = ${SHELL} /Users/jimp/jaba/apache-tomcat-6.0.28/webapps/jaba/binaries/src/clustalw/missing --run tar
+AUTOCONF = ${SHELL} /Users/jimp/jaba/apache-tomcat-6.0.28/webapps/jaba/binaries/src/clustalw/missing --run autoconf
+AUTOHEADER = ${SHELL} /Users/jimp/jaba/apache-tomcat-6.0.28/webapps/jaba/binaries/src/clustalw/missing --run autoheader
+AUTOMAKE = ${SHELL} /Users/jimp/jaba/apache-tomcat-6.0.28/webapps/jaba/binaries/src/clustalw/missing --run automake-1.10
+AWK = awk
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS = -g -O2
+CLUSTALW_NAME = ClustalW
+CLUSTALW_VERSION = 2.0.12
+CPPFLAGS =
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS = -g -O2
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+ECHO_C = \c
+ECHO_N =
+ECHO_T =
+EGREP = /usr/bin/grep -E
+EXEEXT =
+GREP = /usr/bin/grep
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+LDFLAGS =
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /Users/jimp/jaba/apache-tomcat-6.0.28/webapps/jaba/binaries/src/clustalw/missing --run makeinfo
+MKDIR_P = .././install-sh -c -d
+OBJEXT = o
+PACKAGE = clustalw
+PACKAGE_BUGREPORT = clustalw@ucd.ie
+PACKAGE_NAME = clustalw
+PACKAGE_STRING = clustalw 2.0.12
+PACKAGE_TARNAME = clustalw
+PACKAGE_VERSION = 2.0.12
+PATH_SEPARATOR = :
+RANLIB = ranlib
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+VERSION = 2.0.12
+abs_builddir = /Users/jimp/jaba/apache-tomcat-6.0.28/webapps/jaba/binaries/src/clustalw/m4
+abs_srcdir = /Users/jimp/jaba/apache-tomcat-6.0.28/webapps/jaba/binaries/src/clustalw/m4
+abs_top_builddir = /Users/jimp/jaba/apache-tomcat-6.0.28/webapps/jaba/binaries/src/clustalw
+abs_top_srcdir = /Users/jimp/jaba/apache-tomcat-6.0.28/webapps/jaba/binaries/src/clustalw
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build = i386-apple-darwin10.6.0
+build_alias =
+build_cpu = i386
+build_os = darwin10.6.0
+build_vendor = apple
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = i386-apple-darwin10.6.0
+host_alias =
+host_cpu = i386
+host_os = darwin10.6.0
+host_vendor = apple
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = $(SHELL) /Users/jimp/jaba/apache-tomcat-6.0.28/webapps/jaba/binaries/src/clustalw/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+mandir = ${datarootdir}/man
+mkdir_p = $(top_builddir)/./install-sh -c -d
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+prefix = /usr/local
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = ${prefix}/etc
+target = i386-apple-darwin10.6.0
+target_alias =
+target_cpu = i386
+target_os = darwin10.6.0
+target_vendor = apple
+top_build_prefix = ../
+top_builddir = ..
+top_srcdir = ..
+
+# Install m4 macros in this directory
+m4datadir = $(datadir)/aclocal
+
+# List your m4 macros here
+#m4macros = AC_CHECK_VERSION
+m4macros =
+
+# The following is boilerplate
+m4data_DATA =
+EXTRA_DIST = $(m4data_DATA)
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu m4/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu m4/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+install-m4dataDATA: $(m4data_DATA)
+ @$(NORMAL_INSTALL)
+ test -z "$(m4datadir)" || $(MKDIR_P) "$(DESTDIR)$(m4datadir)"
+ @list='$(m4data_DATA)'; for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f=$(am__strip_dir) \
+ echo " $(m4dataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(m4datadir)/$$f'"; \
+ $(m4dataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(m4datadir)/$$f"; \
+ done
+
+uninstall-m4dataDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(m4data_DATA)'; for p in $$list; do \
+ f=$(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(m4datadir)/$$f'"; \
+ rm -f "$(DESTDIR)$(m4datadir)/$$f"; \
+ done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+installdirs:
+ for dir in "$(DESTDIR)$(m4datadir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-m4dataDATA
+
+install-dvi: install-dvi-am
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-info: install-info-am
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-m4dataDATA
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+ distclean-generic distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am \
+ install-m4dataDATA install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+ pdf-am ps ps-am uninstall uninstall-am uninstall-m4dataDATA
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
git://source.jalview.org / jabaws.git / blobdiff