JPRED-2 Add sources of all binaries (except alscript) to Git
[jpred.git] / sources / pairwise / Pairwise / ppport.h
1
2 /* ppport.h -- Perl/Pollution/Portability Version 2.0002 
3  *
4  * Automatically Created by Devel::PPPort on Thu Jul 24 17:34:30 2003 
5  *
6  * Do NOT edit this file directly! -- Edit PPPort.pm instead.
7  *
8  * Version 2.x, Copyright (C) 2001, Paul Marquess.
9  * Version 1.x, Copyright (C) 1999, Kenneth Albanowski.
10  * This code may be used and distributed under the same license as any
11  * version of Perl.
12  * 
13  * This version of ppport.h is designed to support operation with Perl
14  * installations back to 5.004, and has been tested up to 5.8.0.
15  *
16  * If this version of ppport.h is failing during the compilation of this
17  * module, please check if a newer version of Devel::PPPort is available
18  * on CPAN before sending a bug report.
19  *
20  * If you are using the latest version of Devel::PPPort and it is failing
21  * during compilation of this module, please send a report to perlbug@perl.com
22  *
23  * Include all following information:
24  *
25  *  1. The complete output from running "perl -V"
26  *
27  *  2. This file.
28  *
29  *  3. The name & version of the module you were trying to build.
30  *
31  *  4. A full log of the build that failed.
32  *
33  *  5. Any other information that you think could be relevant.
34  *
35  *
36  * For the latest version of this code, please retreive the Devel::PPPort
37  * module from CPAN.
38  * 
39  */
40
41 /*
42  * In order for a Perl extension module to be as portable as possible
43  * across differing versions of Perl itself, certain steps need to be taken.
44  * Including this header is the first major one, then using dTHR is all the
45  * appropriate places and using a PL_ prefix to refer to global Perl
46  * variables is the second.
47  *
48  */
49
50
51 /* If you use one of a few functions that were not present in earlier
52  * versions of Perl, please add a define before the inclusion of ppport.h
53  * for a static include, or use the GLOBAL request in a single module to
54  * produce a global definition that can be referenced from the other
55  * modules.
56  * 
57  * Function:            Static define:           Extern define:
58  * newCONSTSUB()        NEED_newCONSTSUB         NEED_newCONSTSUB_GLOBAL
59  *
60  */
61  
62
63 /* To verify whether ppport.h is needed for your module, and whether any
64  * special defines should be used, ppport.h can be run through Perl to check
65  * your source code. Simply say:
66  * 
67  *      perl -x ppport.h *.c *.h *.xs foo/bar*.c [etc]
68  * 
69  * The result will be a list of patches suggesting changes that should at
70  * least be acceptable, if not necessarily the most efficient solution, or a
71  * fix for all possible problems. It won't catch where dTHR is needed, and
72  * doesn't attempt to account for global macro or function definitions,
73  * nested includes, typemaps, etc.
74  * 
75  * In order to test for the need of dTHR, please try your module under a
76  * recent version of Perl that has threading compiled-in.
77  *
78  */ 
79
80
81 /*
82 #!/usr/bin/perl
83 @ARGV = ("*.xs") if !@ARGV;
84 %badmacros = %funcs = %macros = (); $replace = 0;
85 foreach (<DATA>) {
86         $funcs{$1} = 1 if /Provide:\s+(\S+)/;
87         $macros{$1} = 1 if /^#\s*define\s+([a-zA-Z0-9_]+)/;
88         $replace = $1 if /Replace:\s+(\d+)/;
89         $badmacros{$2}=$1 if $replace and /^#\s*define\s+([a-zA-Z0-9_]+).*?\s+([a-zA-Z0-9_]+)/;
90         $badmacros{$1}=$2 if /Replace (\S+) with (\S+)/;
91 }
92 foreach $filename (map(glob($_),@ARGV)) {
93         unless (open(IN, "<$filename")) {
94                 warn "Unable to read from $file: $!\n";
95                 next;
96         }
97         print "Scanning $filename...\n";
98         $c = ""; while (<IN>) { $c .= $_; } close(IN);
99         $need_include = 0; %add_func = (); $changes = 0;
100         $has_include = ($c =~ /#.*include.*ppport/m);
101
102         foreach $func (keys %funcs) {
103                 if ($c =~ /#.*define.*\bNEED_$func(_GLOBAL)?\b/m) {
104                         if ($c !~ /\b$func\b/m) {
105                                 print "If $func isn't needed, you don't need to request it.\n" if
106                                 $changes += ($c =~ s/^.*#.*define.*\bNEED_$func\b.*\n//m);
107                         } else {
108                                 print "Uses $func\n";
109                                 $need_include = 1;
110                         }
111                 } else {
112                         if ($c =~ /\b$func\b/m) {
113                                 $add_func{$func} =1 ;
114                                 print "Uses $func\n";
115                                 $need_include = 1;
116                         }
117                 }
118         }
119
120         if (not $need_include) {
121                 foreach $macro (keys %macros) {
122                         if ($c =~ /\b$macro\b/m) {
123                                 print "Uses $macro\n";
124                                 $need_include = 1;
125                         }
126                 }
127         }
128
129         foreach $badmacro (keys %badmacros) {
130                 if ($c =~ /\b$badmacro\b/m) {
131                         $changes += ($c =~ s/\b$badmacro\b/$badmacros{$badmacro}/gm);
132                         print "Uses $badmacros{$badmacro} (instead of $badmacro)\n";
133                         $need_include = 1;
134                 }
135         }
136         
137         if (scalar(keys %add_func) or $need_include != $has_include) {
138                 if (!$has_include) {
139                         $inc = join('',map("#define NEED_$_\n", sort keys %add_func)).
140                                "#include \"ppport.h\"\n";
141                         $c = "$inc$c" unless $c =~ s/#.*include.*XSUB.*\n/$&$inc/m;
142                 } elsif (keys %add_func) {
143                         $inc = join('',map("#define NEED_$_\n", sort keys %add_func));
144                         $c = "$inc$c" unless $c =~ s/^.*#.*include.*ppport.*$/$inc$&/m;
145                 }
146                 if (!$need_include) {
147                         print "Doesn't seem to need ppport.h.\n";
148                         $c =~ s/^.*#.*include.*ppport.*\n//m;
149                 }
150                 $changes++;
151         }
152         
153         if ($changes) {
154                 open(OUT,">/tmp/ppport.h.$$");
155                 print OUT $c;
156                 close(OUT);
157                 open(DIFF, "diff -u $filename /tmp/ppport.h.$$|");
158                 while (<DIFF>) { s!/tmp/ppport\.h\.$$!$filename.patched!; print STDOUT; }
159                 close(DIFF);
160                 unlink("/tmp/ppport.h.$$");
161         } else {
162                 print "Looks OK\n";
163         }
164 }
165 __DATA__
166 */
167
168 #ifndef _P_P_PORTABILITY_H_
169 #define _P_P_PORTABILITY_H_
170
171 #ifndef PERL_REVISION
172 #   ifndef __PATCHLEVEL_H_INCLUDED__
173 #       include "patchlevel.h"
174 #   endif
175 #   ifndef PERL_REVISION
176 #       define PERL_REVISION    (5)
177         /* Replace: 1 */
178 #       define PERL_VERSION     PATCHLEVEL
179 #       define PERL_SUBVERSION  SUBVERSION
180         /* Replace PERL_PATCHLEVEL with PERL_VERSION */
181         /* Replace: 0 */
182 #   endif
183 #endif
184
185 #define PERL_BCDVERSION ((PERL_REVISION * 0x1000000L) + (PERL_VERSION * 0x1000L) + PERL_SUBVERSION)
186
187 /* It is very unlikely that anyone will try to use this with Perl 6 
188    (or greater), but who knows.
189  */
190 #if PERL_REVISION != 5
191 #       error ppport.h only works with Perl version 5
192 #endif /* PERL_REVISION != 5 */
193
194 #ifndef ERRSV
195 #       define ERRSV perl_get_sv("@",FALSE)
196 #endif
197
198 #if (PERL_VERSION < 4) || ((PERL_VERSION == 4) && (PERL_SUBVERSION <= 5))
199 /* Replace: 1 */
200 #       define PL_Sv            Sv
201 #       define PL_compiling     compiling
202 #       define PL_copline       copline
203 #       define PL_curcop        curcop
204 #       define PL_curstash      curstash
205 #       define PL_defgv         defgv
206 #       define PL_dirty         dirty
207 #       define PL_dowarn        dowarn
208 #       define PL_hints         hints
209 #       define PL_na            na
210 #       define PL_perldb        perldb
211 #       define PL_rsfp_filters  rsfp_filters
212 #       define PL_rsfpv         rsfp
213 #       define PL_stdingv       stdingv
214 #       define PL_sv_no         sv_no
215 #       define PL_sv_undef      sv_undef
216 #       define PL_sv_yes        sv_yes
217 /* Replace: 0 */
218 #endif
219
220 #ifdef HASATTRIBUTE
221 #  if defined(__GNUC__) && defined(__cplusplus)
222 #    define PERL_UNUSED_DECL
223 #  else
224 #    define PERL_UNUSED_DECL __attribute__((unused))
225 #  endif
226 #else
227 #  define PERL_UNUSED_DECL
228 #endif
229
230 #ifndef dNOOP
231 #  define NOOP (void)0
232 #  define dNOOP extern int Perl___notused PERL_UNUSED_DECL
233 #endif
234
235 #ifndef dTHR
236 #  define dTHR          dNOOP
237 #endif
238
239 #ifndef dTHX
240 #  define dTHX          dNOOP
241 #  define dTHXa(x)      dNOOP
242 #  define dTHXoa(x)     dNOOP
243 #endif
244
245 #ifndef pTHX
246 #    define pTHX        void
247 #    define pTHX_
248 #    define aTHX
249 #    define aTHX_
250 #endif         
251
252 #ifndef UVSIZE
253 #   define UVSIZE IVSIZE
254 #endif
255
256 #ifndef NVTYPE
257 #   if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE)
258 #       define NVTYPE long double
259 #   else
260 #       define NVTYPE double
261 #   endif
262 typedef NVTYPE NV;
263 #endif
264
265 #ifndef INT2PTR
266
267 #if (IVSIZE == PTRSIZE) && (UVSIZE == PTRSIZE)
268 #  define PTRV                  UV
269 #  define INT2PTR(any,d)        (any)(d)
270 #else
271 #  if PTRSIZE == LONGSIZE
272 #    define PTRV                unsigned long
273 #  else
274 #    define PTRV                unsigned
275 #  endif
276 #  define INT2PTR(any,d)        (any)(PTRV)(d)
277 #endif
278 #define NUM2PTR(any,d)  (any)(PTRV)(d)
279 #define PTR2IV(p)       INT2PTR(IV,p)
280 #define PTR2UV(p)       INT2PTR(UV,p)
281 #define PTR2NV(p)       NUM2PTR(NV,p)
282 #if PTRSIZE == LONGSIZE
283 #  define PTR2ul(p)     (unsigned long)(p)
284 #else
285 #  define PTR2ul(p)     INT2PTR(unsigned long,p)        
286 #endif
287
288 #endif /* !INT2PTR */
289
290 #ifndef boolSV
291 #       define boolSV(b) ((b) ? &PL_sv_yes : &PL_sv_no)
292 #endif
293
294 #ifndef gv_stashpvn
295 #       define gv_stashpvn(str,len,flags) gv_stashpv(str,flags)
296 #endif
297
298 #ifndef newSVpvn
299 #       define newSVpvn(data,len) ((len) ? newSVpv ((data), (len)) : newSVpv ("", 0))
300 #endif
301
302 #ifndef newRV_inc
303 /* Replace: 1 */
304 #       define newRV_inc(sv) newRV(sv)
305 /* Replace: 0 */
306 #endif
307
308 /* DEFSV appears first in 5.004_56 */
309 #ifndef DEFSV
310 #  define DEFSV GvSV(PL_defgv)
311 #endif
312
313 #ifndef SAVE_DEFSV
314 #    define SAVE_DEFSV SAVESPTR(GvSV(PL_defgv))
315 #endif
316
317 #ifndef newRV_noinc
318 #  ifdef __GNUC__
319 #    define newRV_noinc(sv)               \
320       ({                                  \
321           SV *nsv = (SV*)newRV(sv);       \
322           SvREFCNT_dec(sv);               \
323           nsv;                            \
324       })
325 #  else
326 #    if defined(USE_THREADS)
327 static SV * newRV_noinc (SV * sv)
328 {
329           SV *nsv = (SV*)newRV(sv);       
330           SvREFCNT_dec(sv);               
331           return nsv;                     
332 }
333 #    else
334 #      define newRV_noinc(sv)    \
335         (PL_Sv=(SV*)newRV(sv), SvREFCNT_dec(sv), (SV*)PL_Sv)
336 #    endif
337 #  endif
338 #endif
339
340 /* Provide: newCONSTSUB */
341
342 /* newCONSTSUB from IO.xs is in the core starting with 5.004_63 */
343 #if (PERL_VERSION < 4) || ((PERL_VERSION == 4) && (PERL_SUBVERSION < 63))
344
345 #if defined(NEED_newCONSTSUB)
346 static
347 #else
348 extern void newCONSTSUB(HV * stash, char * name, SV *sv);
349 #endif
350
351 #if defined(NEED_newCONSTSUB) || defined(NEED_newCONSTSUB_GLOBAL)
352 void
353 newCONSTSUB(stash,name,sv)
354 HV *stash;
355 char *name;
356 SV *sv;
357 {
358         U32 oldhints = PL_hints;
359         HV *old_cop_stash = PL_curcop->cop_stash;
360         HV *old_curstash = PL_curstash;
361         line_t oldline = PL_curcop->cop_line;
362         PL_curcop->cop_line = PL_copline;
363
364         PL_hints &= ~HINT_BLOCK_SCOPE;
365         if (stash)
366                 PL_curstash = PL_curcop->cop_stash = stash;
367
368         newSUB(
369
370 #if (PERL_VERSION < 3) || ((PERL_VERSION == 3) && (PERL_SUBVERSION < 22))
371      /* before 5.003_22 */
372                 start_subparse(),
373 #else
374 #  if (PERL_VERSION == 3) && (PERL_SUBVERSION == 22)
375      /* 5.003_22 */
376                 start_subparse(0),
377 #  else
378      /* 5.003_23  onwards */
379                 start_subparse(FALSE, 0),
380 #  endif
381 #endif
382
383                 newSVOP(OP_CONST, 0, newSVpv(name,0)),
384                 newSVOP(OP_CONST, 0, &PL_sv_no),   /* SvPV(&PL_sv_no) == "" -- GMB */
385                 newSTATEOP(0, Nullch, newSVOP(OP_CONST, 0, sv))
386         );
387
388         PL_hints = oldhints;
389         PL_curcop->cop_stash = old_cop_stash;
390         PL_curstash = old_curstash;
391         PL_curcop->cop_line = oldline;
392 }
393 #endif
394
395 #endif /* newCONSTSUB */
396
397 #ifndef START_MY_CXT
398
399 /*
400  * Boilerplate macros for initializing and accessing interpreter-local
401  * data from C.  All statics in extensions should be reworked to use
402  * this, if you want to make the extension thread-safe.  See ext/re/re.xs
403  * for an example of the use of these macros.
404  *
405  * Code that uses these macros is responsible for the following:
406  * 1. #define MY_CXT_KEY to a unique string, e.g. "DynaLoader_guts"
407  * 2. Declare a typedef named my_cxt_t that is a structure that contains
408  *    all the data that needs to be interpreter-local.
409  * 3. Use the START_MY_CXT macro after the declaration of my_cxt_t.
410  * 4. Use the MY_CXT_INIT macro such that it is called exactly once
411  *    (typically put in the BOOT: section).
412  * 5. Use the members of the my_cxt_t structure everywhere as
413  *    MY_CXT.member.
414  * 6. Use the dMY_CXT macro (a declaration) in all the functions that
415  *    access MY_CXT.
416  */
417
418 #if defined(MULTIPLICITY) || defined(PERL_OBJECT) || \
419     defined(PERL_CAPI)    || defined(PERL_IMPLICIT_CONTEXT)
420
421 /* This must appear in all extensions that define a my_cxt_t structure,
422  * right after the definition (i.e. at file scope).  The non-threads
423  * case below uses it to declare the data as static. */
424 #define START_MY_CXT
425
426 #if (PERL_VERSION < 4 || (PERL_VERSION == 4 && PERL_SUBVERSION < 68 ))
427 /* Fetches the SV that keeps the per-interpreter data. */
428 #define dMY_CXT_SV \
429         SV *my_cxt_sv = perl_get_sv(MY_CXT_KEY, FALSE)
430 #else /* >= perl5.004_68 */
431 #define dMY_CXT_SV \
432         SV *my_cxt_sv = *hv_fetch(PL_modglobal, MY_CXT_KEY,             \
433                                   sizeof(MY_CXT_KEY)-1, TRUE)
434 #endif /* < perl5.004_68 */
435
436 /* This declaration should be used within all functions that use the
437  * interpreter-local data. */
438 #define dMY_CXT \
439         dMY_CXT_SV;                                                     \
440         my_cxt_t *my_cxtp = INT2PTR(my_cxt_t*,SvUV(my_cxt_sv))
441
442 /* Creates and zeroes the per-interpreter data.
443  * (We allocate my_cxtp in a Perl SV so that it will be released when
444  * the interpreter goes away.) */
445 #define MY_CXT_INIT \
446         dMY_CXT_SV;                                                     \
447         /* newSV() allocates one more than needed */                    \
448         my_cxt_t *my_cxtp = (my_cxt_t*)SvPVX(newSV(sizeof(my_cxt_t)-1));\
449         Zero(my_cxtp, 1, my_cxt_t);                                     \
450         sv_setuv(my_cxt_sv, PTR2UV(my_cxtp))
451
452 /* This macro must be used to access members of the my_cxt_t structure.
453  * e.g. MYCXT.some_data */
454 #define MY_CXT          (*my_cxtp)
455
456 /* Judicious use of these macros can reduce the number of times dMY_CXT
457  * is used.  Use is similar to pTHX, aTHX etc. */
458 #define pMY_CXT         my_cxt_t *my_cxtp
459 #define pMY_CXT_        pMY_CXT,
460 #define _pMY_CXT        ,pMY_CXT
461 #define aMY_CXT         my_cxtp
462 #define aMY_CXT_        aMY_CXT,
463 #define _aMY_CXT        ,aMY_CXT
464
465 #else /* single interpreter */
466
467
468 #define START_MY_CXT    static my_cxt_t my_cxt;
469 #define dMY_CXT_SV      dNOOP
470 #define dMY_CXT         dNOOP
471 #define MY_CXT_INIT     NOOP
472 #define MY_CXT          my_cxt
473
474 #define pMY_CXT         void
475 #define pMY_CXT_
476 #define _pMY_CXT
477 #define aMY_CXT
478 #define aMY_CXT_
479 #define _aMY_CXT
480
481 #endif 
482
483 #endif /* START_MY_CXT */
484
485 #ifndef IVdf
486 #  if IVSIZE == LONGSIZE
487 #       define  IVdf            "ld"
488 #       define  UVuf            "lu"
489 #       define  UVof            "lo"
490 #       define  UVxf            "lx"
491 #       define  UVXf            "lX"
492 #   else
493 #       if IVSIZE == INTSIZE
494 #           define      IVdf    "d"
495 #           define      UVuf    "u"
496 #           define      UVof    "o"
497 #           define      UVxf    "x"
498 #           define      UVXf    "X"
499 #       endif
500 #   endif
501 #endif
502
503 #ifndef NVef
504 #   if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE) && \
505         defined(PERL_PRIfldbl) /* Not very likely, but let's try anyway. */ 
506 #       define NVef             PERL_PRIeldbl
507 #       define NVff             PERL_PRIfldbl
508 #       define NVgf             PERL_PRIgldbl
509 #   else
510 #       define NVef             "e"
511 #       define NVff             "f"
512 #       define NVgf             "g"
513 #   endif
514 #endif
515
516 #ifndef AvFILLp                 /* Older perls (<=5.003) lack AvFILLp */
517 #   define AvFILLp AvFILL
518 #endif
519
520 #ifdef SvPVbyte
521 #   if PERL_REVISION == 5 && PERL_VERSION < 7
522        /* SvPVbyte does not work in perl-5.6.1, borrowed version for 5.7.3 */
523 #       undef SvPVbyte
524 #       define SvPVbyte(sv, lp) \
525           ((SvFLAGS(sv) & (SVf_POK|SVf_UTF8)) == (SVf_POK) \
526            ? ((lp = SvCUR(sv)), SvPVX(sv)) : my_sv_2pvbyte(aTHX_ sv, &lp))
527        static char *
528        my_sv_2pvbyte(pTHX_ register SV *sv, STRLEN *lp)
529        {   
530            sv_utf8_downgrade(sv,0);
531            return SvPV(sv,*lp);
532        }
533 #   endif
534 #else
535 #   define SvPVbyte SvPV
536 #endif
537
538 #endif /* _P_P_PORTABILITY_H_ */
539
540 /* End of File ppport.h */