binaries/src/clustalw/m4/Makefile

   1 # Makefile.in generated by automake 1.10.2 from Makefile.am.
   2 # m4/Makefile.  Generated from Makefile.in by configure.
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15
  16
  17
  18 pkgdatadir = $(datadir)/clustalw
  19 pkglibdir = $(libdir)/clustalw
  20 pkgincludedir = $(includedir)/clustalw
  21 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  22 install_sh_DATA = $(install_sh) -c -m 644
  23 install_sh_PROGRAM = $(install_sh) -c
  24 install_sh_SCRIPT = $(install_sh) -c
  25 INSTALL_HEADER = $(INSTALL_DATA)
  26 transform = $(program_transform_name)
  27 NORMAL_INSTALL = :
  28 PRE_INSTALL = :
  29 POST_INSTALL = :
  30 NORMAL_UNINSTALL = :
  31 PRE_UNINSTALL = :
  32 POST_UNINSTALL = :
  33 build_triplet = x86_64-unknown-linux-gnu
  34 host_triplet = x86_64-unknown-linux-gnu
  35 target_triplet = x86_64-unknown-linux-gnu
  36 subdir = m4
  37 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
  38 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  39 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
  40 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  41         $(ACLOCAL_M4)
  42 mkinstalldirs = $(install_sh) -d
  43 CONFIG_HEADER = $(top_builddir)/src/config.h
  44 CONFIG_CLEAN_FILES =
  45 SOURCES =
  46 DIST_SOURCES =
  47 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
  48 am__vpath_adj = case $$p in \
  49     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  50     *) f=$$p;; \
  51   esac;
  52 am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
  53 am__installdirs = "$(DESTDIR)$(m4datadir)"
  54 m4dataDATA_INSTALL = $(INSTALL_DATA)
  55 DATA = $(m4data_DATA)
  56 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  57 ACLOCAL = ${SHELL} /homes/pvtroshin/workspace/clustengine/binaries/src/clustalw/missing --run aclocal-1.10
  58 AMTAR = ${SHELL} /homes/pvtroshin/workspace/clustengine/binaries/src/clustalw/missing --run tar
  59 AUTOCONF = ${SHELL} /homes/pvtroshin/workspace/clustengine/binaries/src/clustalw/missing --run autoconf
  60 AUTOHEADER = ${SHELL} /homes/pvtroshin/workspace/clustengine/binaries/src/clustalw/missing --run autoheader
  61 AUTOMAKE = ${SHELL} /homes/pvtroshin/workspace/clustengine/binaries/src/clustalw/missing --run automake-1.10
  62 AWK = gawk
  63 CC = gcc
  64 CCDEPMODE = depmode=gcc3
  65 CFLAGS = -g -O2
  66 CLUSTALW_NAME = ClustalW
  67 CLUSTALW_VERSION = 2.0.12
  68 CPPFLAGS =
  69 CXX = g++
  70 CXXCPP = g++ -E
  71 CXXDEPMODE = depmode=gcc3
  72 CXXFLAGS = -g -O2
  73 CYGPATH_W = echo
  74 DEFS = -DHAVE_CONFIG_H
  75 DEPDIR = .deps
  76 ECHO_C =
  77 ECHO_N = -n
  78 ECHO_T =
  79 EGREP = /bin/grep -E
  80 EXEEXT =
  81 GREP = /bin/grep
  82 INSTALL = /usr/bin/install -c
  83 INSTALL_DATA = ${INSTALL} -m 644
  84 INSTALL_PROGRAM = ${INSTALL}
  85 INSTALL_SCRIPT = ${INSTALL}
  86 INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
  87 LDFLAGS =
  88 LIBOBJS =
  89 LIBS =
  90 LTLIBOBJS =
  91 MAKEINFO = ${SHELL} /homes/pvtroshin/workspace/clustengine/binaries/src/clustalw/missing --run makeinfo
  92 MKDIR_P = /bin/mkdir -p
  93 OBJEXT = o
  94 PACKAGE = clustalw
  95 PACKAGE_BUGREPORT = clustalw@ucd.ie
  96 PACKAGE_NAME = clustalw
  97 PACKAGE_STRING = clustalw 2.0.12
  98 PACKAGE_TARNAME = clustalw
  99 PACKAGE_VERSION = 2.0.12
 100 PATH_SEPARATOR = :
 101 RANLIB = ranlib
 102 SET_MAKE =
 103 SHELL = /bin/sh
 104 STRIP =
 105 VERSION = 2.0.12
 106 abs_builddir = /homes/pvtroshin/workspace/clustengine/binaries/src/clustalw/m4
 107 abs_srcdir = /homes/pvtroshin/workspace/clustengine/binaries/src/clustalw/m4
 108 abs_top_builddir = /homes/pvtroshin/workspace/clustengine/binaries/src/clustalw
 109 abs_top_srcdir = /homes/pvtroshin/workspace/clustengine/binaries/src/clustalw
 110 ac_ct_CC = gcc
 111 ac_ct_CXX = g++
 112 am__include = include
 113 am__leading_dot = .
 114 am__quote =
 115 am__tar = ${AMTAR} chof - "$$tardir"
 116 am__untar = ${AMTAR} xf -
 117 bindir = ${exec_prefix}/bin
 118 build = x86_64-unknown-linux-gnu
 119 build_alias =
 120 build_cpu = x86_64
 121 build_os = linux-gnu
 122 build_vendor = unknown
 123 builddir = .
 124 datadir = ${datarootdir}
 125 datarootdir = ${prefix}/share
 126 docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
 127 dvidir = ${docdir}
 128 exec_prefix = ${prefix}
 129 host = x86_64-unknown-linux-gnu
 130 host_alias =
 131 host_cpu = x86_64
 132 host_os = linux-gnu
 133 host_vendor = unknown
 134 htmldir = ${docdir}
 135 includedir = ${prefix}/include
 136 infodir = ${datarootdir}/info
 137 install_sh = $(SHELL) /homes/pvtroshin/workspace/clustengine/binaries/src/clustalw/install-sh
 138 libdir = ${exec_prefix}/lib
 139 libexecdir = ${exec_prefix}/libexec
 140 localedir = ${datarootdir}/locale
 141 localstatedir = ${prefix}/var
 142 mandir = ${datarootdir}/man
 143 mkdir_p = /bin/mkdir -p
 144 oldincludedir = /usr/include
 145 pdfdir = ${docdir}
 146 prefix = /usr/local
 147 program_transform_name = s,x,x,
 148 psdir = ${docdir}
 149 sbindir = ${exec_prefix}/sbin
 150 sharedstatedir = ${prefix}/com
 151 srcdir = .
 152 sysconfdir = ${prefix}/etc
 153 target = x86_64-unknown-linux-gnu
 154 target_alias =
 155 target_cpu = x86_64
 156 target_os = linux-gnu
 157 target_vendor = unknown
 158 top_build_prefix = ../
 159 top_builddir = ..
 160 top_srcdir = ..
 161
 162 # Install m4 macros in this directory
 163 m4datadir = $(datadir)/aclocal
 164
 165 # List your m4 macros here
 166 #m4macros = AC_CHECK_VERSION
 167 m4macros =
 168
 169 # The following is boilerplate
 170 m4data_DATA =
 171 EXTRA_DIST = $(m4data_DATA)
 172 all: all-am
 173
 174 .SUFFIXES:
 175 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 176         @for dep in $?; do \
 177           case '$(am__configure_deps)' in \
 178             *$$dep*) \
 179               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 180                 && { if test -f $@; then exit 0; else break; fi; }; \
 181               exit 1;; \
 182           esac; \
 183         done; \
 184         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  m4/Makefile'; \
 185         cd $(top_srcdir) && \
 186           $(AUTOMAKE) --gnu  m4/Makefile
 187 .PRECIOUS: Makefile
 188 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 189         @case '$?' in \
 190           *config.status*) \
 191             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 192           *) \
 193             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 194             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 195         esac;
 196
 197 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 198         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 199
 200 $(top_srcdir)/configure:  $(am__configure_deps)
 201         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 202 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 203         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 204 install-m4dataDATA: $(m4data_DATA)
 205         @$(NORMAL_INSTALL)
 206         test -z "$(m4datadir)" || $(MKDIR_P) "$(DESTDIR)$(m4datadir)"
 207         @list='$(m4data_DATA)'; for p in $$list; do \
 208           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 209           f=$(am__strip_dir) \
 210           echo " $(m4dataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(m4datadir)/$$f'"; \
 211           $(m4dataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(m4datadir)/$$f"; \
 212         done
 213
 214 uninstall-m4dataDATA:
 215         @$(NORMAL_UNINSTALL)
 216         @list='$(m4data_DATA)'; for p in $$list; do \
 217           f=$(am__strip_dir) \
 218           echo " rm -f '$(DESTDIR)$(m4datadir)/$$f'"; \
 219           rm -f "$(DESTDIR)$(m4datadir)/$$f"; \
 220         done
 221 tags: TAGS
 222 TAGS:
 223
 224 ctags: CTAGS
 225 CTAGS:
 226
 227
 228 distdir: $(DISTFILES)
 229         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 230         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 231         list='$(DISTFILES)'; \
 232           dist_files=`for file in $$list; do echo $$file; done | \
 233           sed -e "s|^$$srcdirstrip/||;t" \
 234               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 235         case $$dist_files in \
 236           */*) $(MKDIR_P) `echo "$$dist_files" | \
 237                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 238                            sort -u` ;; \
 239         esac; \
 240         for file in $$dist_files; do \
 241           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 242           if test -d $$d/$$file; then \
 243             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 244             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 245               cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
 246             fi; \
 247             cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
 248           else \
 249             test -f $(distdir)/$$file \
 250             || cp -p $$d/$$file $(distdir)/$$file \
 251             || exit 1; \
 252           fi; \
 253         done
 254 check-am: all-am
 255 check: check-am
 256 all-am: Makefile $(DATA)
 257 installdirs:
 258         for dir in "$(DESTDIR)$(m4datadir)"; do \
 259           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 260         done
 261 install: install-am
 262 install-exec: install-exec-am
 263 install-data: install-data-am
 264 uninstall: uninstall-am
 265
 266 install-am: all-am
 267         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 268
 269 installcheck: installcheck-am
 270 install-strip:
 271         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 272           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 273           `test -z '$(STRIP)' || \
 274             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 275 mostlyclean-generic:
 276
 277 clean-generic:
 278
 279 distclean-generic:
 280         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 281
 282 maintainer-clean-generic:
 283         @echo "This command is intended for maintainers to use"
 284         @echo "it deletes files that may require special tools to rebuild."
 285 clean: clean-am
 286
 287 clean-am: clean-generic mostlyclean-am
 288
 289 distclean: distclean-am
 290         -rm -f Makefile
 291 distclean-am: clean-am distclean-generic
 292
 293 dvi: dvi-am
 294
 295 dvi-am:
 296
 297 html: html-am
 298
 299 info: info-am
 300
 301 info-am:
 302
 303 install-data-am: install-m4dataDATA
 304
 305 install-dvi: install-dvi-am
 306
 307 install-exec-am:
 308
 309 install-html: install-html-am
 310
 311 install-info: install-info-am
 312
 313 install-man:
 314
 315 install-pdf: install-pdf-am
 316
 317 install-ps: install-ps-am
 318
 319 installcheck-am:
 320
 321 maintainer-clean: maintainer-clean-am
 322         -rm -f Makefile
 323 maintainer-clean-am: distclean-am maintainer-clean-generic
 324
 325 mostlyclean: mostlyclean-am
 326
 327 mostlyclean-am: mostlyclean-generic
 328
 329 pdf: pdf-am
 330
 331 pdf-am:
 332
 333 ps: ps-am
 334
 335 ps-am:
 336
 337 uninstall-am: uninstall-m4dataDATA
 338
 339 .MAKE: install-am install-strip
 340
 341 .PHONY: all all-am check check-am clean clean-generic distclean \
 342         distclean-generic distdir dvi dvi-am html html-am info info-am \
 343         install install-am install-data install-data-am install-dvi \
 344         install-dvi-am install-exec install-exec-am install-html \
 345         install-html-am install-info install-info-am \
 346         install-m4dataDATA install-man install-pdf install-pdf-am \
 347         install-ps install-ps-am install-strip installcheck \
 348         installcheck-am installdirs maintainer-clean \
 349         maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
 350         pdf-am ps ps-am uninstall uninstall-am uninstall-m4dataDATA
 351
 352 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 353 # Otherwise a system limit (for SysV at least) may be exceeded.
 354 .NOEXPORT: